t rex 450 plus idle up function

[james 1989]

right looking at trying out the idle up for the first time today and just want to check my throttle cureve and pitch curve settings

I-TH throttle curve idle up
1 90%
2 85%
3 80%
4 85%
5 10%

I-PI Pitch curve idle up
1 25%
2 50%
3 70%
4 83%
5 95%

do those setting s look ok these are on the align t6 tx

thanks
james

[james 1989]

I hope the 10% on Throttle curve position 5 is a typo.... it shouls be 90%
Your pitch curve should be 50% (0deg on the blades) where your throttle is the lowest (3. 80%)

yes that was wrong it was 100% but ive changed it to 90 % so little confused so what should 1 to 5 look like for the I-PI pitch curve?

thanks
james

[Guest]

Align states the following in the manual
General Throttle : 0%,40%,60to65%,85%,100%
General Pitch: position 1 - 0deg, position 3 - +5deg, position 5 - from 9 to 11 deg.

Idle 1 throttle:90%,85%,80%,85%,100%
Idle 1 pitch: Position 1- minus 5deg, position 3 - +5deg, position 5 - 9 to 11 deg

[james 1989]

thanks for that.

james

[james 1989]

is this right for the idle up pitch curve settings?

I-PI Pitch curve idle up
1 25%
2 50%
3 70%
4 83%
5 95%

thanks
james

[Gingerr6]

is this right for the idle up pitch curve settings?

I-PI Pitch curve idle up
1 25%
2 50%
3 70%
4 83%
5 95%

thanks
james

idealy it should be 0-100.

0 giving -11 100 giving =11 (or what every you you run)

[Guest]

Hi James

If the heli is set up correctly then then the settings for Idle up 1 seems to be close, 4 should be 85% and 5 should be 100%

@Gingerr6 - those are the perfect Idle up 2 settings acording to the Align Manual.

[Sekra]

you should always go with straight throttle curves ( 80-80-80-80-80 ) in my opinion