Announcement

Collapse
No announcement yet.

Oops! Blade 300X on sickbed.

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Oops! Blade 300X on sickbed.

    Yep, Junior (as I call him) is on his sick bed with a bent main shaft after being brutally and maliciously attacked by a rogue and out of control clump of grass. Admittedly Junior was flying a little too close to the ground for the *cough* pilots *splutter* comfort and said 'pilot' was just easing back the stick when aforementioned clump of feral field grass leapt and grabbed the skids.

    Now, Junior wasn't moving fast or anything and said lump of recalcitrant grass was tall and strong. A manly grass you might say - Junior stopped cold and fell over. At first I thought there was no damage but on spin up I could see the main shaft was badly bent.

    Spares on order from Wheelspin (the only people to have any spares).

    A short flight at 1:20.

    Lesson learnt? If the heli wants to smell the wild flowers one should simply yell NO! in a firm tone and yank the chain down.... Oh, that last bit's for dogs isn't it? Well, NO! in a firm tone it is then. Ordered feathering shaft just in case. Surprised there wasn't more damage but given it was a plop and not a THUD! maybe I shouldn't be.

    Tomorrow I bring Big Larry (450X. I'll explain name later).

    Vikki.
    Last edited by Vikki; 05-07-2012, 03:28 PM.

  • #2
    :-) Hi Vikki

    Hope the 300 gets better soon. Good to see you posting again, I have missed your wit.

    Comment


    • #3
      hope that junior will feel better soon
      DX7 mode2
      Gaui nx4
      T700n
      miniprotos fbl 4s
      voodoo 600
      logo 600 3D for sale

      Comment


      • #4
        I'm sure he will. Only got him yesterday. Good flight yesterday, today - well pushing it a bit I was.

        Comment


        • #5
          not the only people with spares vikki

          Blade 300X Spares - Parts & Accessories For The Blade 300 X
          Ron

          hobby-hangar.co.uk
          SWRCH-GO big or Go home!
          http://www.ultimatebuildandfly.co.uk/

          Comment


          • #6
            Thanks, Ron. Didn't know about those people. Will add them to my bookmarks.

            Vikki.

            Comment


            • #7
              the guys name is Jake. He advertises on here and will do good deals.
              Ron

              hobby-hangar.co.uk
              SWRCH-GO big or Go home!
              http://www.ultimatebuildandfly.co.uk/

              Comment


              • #8
                Added to my bookmark too
                DX7 mode2
                Gaui nx4
                T700n
                miniprotos fbl 4s
                voodoo 600
                logo 600 3D for sale

                Comment


                • #9
                  To me, rc choppers is your best bet. Wheelspin seems to be a bit strange in that most of their stock is either warehouse stock or shadow stock. I don't know whether they actually any stock. I was put off ordering a spare part from them before. I ended up ordering from Tower Hobbies in the States instead.

                  I hope your 300x gets fixed soon though. I saw one today in the flesh. was impressive and bigger than I thought. That beastX is impressive.. I might think about getting one just for the BX and sell the 300x with something else. Tarot ZYX maybe

                  Comment


                  • #10
                    Just taken the main shaft out and the Jesus bolt was broken both ends and the shaft was severely bent at the bottom hole that holds the drive gear. Large hole in a small shaft created a weak point. Only other thing was a bent feathering shaft. Blades survived without damage. So, a £6 repair bill. Next time I'll be a bit more careful and make sure it doesn't get low enough to catch field grass. No wonder cows spend ages chewing the stuff.

                    Vikki.

                    Comment


                    • #11
                      After sleeping on it and thinking of the small size of the Jesus bolt and the feathering shaft being tiny and the weakening of the main shaft at the bolt holes I'm going to say that these will always go in a light crash.

                      Understandable given the size of the 300x and if it only comes to £6 to fix then it's not enough to hurt but enough, combined with loss of flight time, to learn a lesson about flying.

                      Vikki.

                      Comment


                      • #12
                        I thought about the 300x for a time but took my align 250 flybarless instead with the DFC head and spektrum AR7200X and oh my word what a result, now im no pro but the thing goes so well, just like a big MCPX. Was thinkin of the 450x next but my local shops tryin to sell me a ready built align 450 DFC with the 3gx and lipo for £400 so not sure which way to go.

                        Comment


                        • #13
                          now my little baby is on sickbed too
                          after work,tried to fly in strong wind... too low, too much wind and not enough HS
                          IMG_0849.jpgIMG_0850.jpgIMG_0851.jpg
                          main blades, main shaft and right frame
                          (video uploading)
                          found all the spares at wheelspin (especially frame)
                          i will have to fly my big birds this week end, very sad...
                          DX7 mode2
                          Gaui nx4
                          T700n
                          miniprotos fbl 4s
                          voodoo 600
                          logo 600 3D for sale

                          Comment


                          • #14
                            Ouch! Poor little thing. Hope she gets better soon. By the way, did you know the main gear is the 450 one?

                            Vikki.
                            Last edited by Vikki; 06-07-2012, 06:29 PM.

                            Comment


                            • #15
                              300X crash in the wind - YouTube
                              here is the drama
                              thanks for the info for the gear
                              DX7 mode2
                              Gaui nx4
                              T700n
                              miniprotos fbl 4s
                              voodoo 600
                              logo 600 3D for sale

                              Comment

                              Working...
                              X