Urgent help needed before weather gets better

[paul f]

Have just got into this electric stuff, have got 450 and 600 trex both on different tx so have got a dx8 to do both.

1. Havnt got much idea of this rate and head hold thing, any pointers?
2. Which switch deals with it on the dx8?
3. On by 600 i have a battery checker etc and a rx battery. Does this plug into the data/bind port of rx?

Any help appreciated

Paul

[Rich23]

Hi

For the HH and rate switch go into gyro use channel (ch) Aux 2 and assign gyro in the switch (sw) at the bottom. This will make HH at 0(green status light) and rate at 1(red status light).


Hope this helps
Rich

[dieselcarb]

i personally suggest finding some 1 to help you set everything up so 1 u know its right and 2 u can doit next time round. i had help 1 st time round and learnt massivly b4 that i had no idear whatsoever

if all else fails a shop will set it up but u wont learn or at worst they doit wrong like they did for me