Raptor V2 Kit :-) tail question

[dabba]

Hi I spent the week building my kit raptor 30 v2.

Quick question, the tail shaft seems to move left/right a bit too much?
The pin is through the red gear and i have the loctited grub screw in the shaft it just seems to move in and out of the tail case bearing say 2mm almost as if it should have a washer and smallscrew ?
I can take a pic if it helps

Thanks

David

[G-DAVE]

Hi dabba
You have put the red belt gear wheel together incorrectly - slide it off the tail output shaft and take it apart - now put it together as per instructions - in effect just turn it round the other way so that when you look at it were the belt runs the sides are slightly chamferred.
Dave D

[dabba]

Thanks Dave, I must have read the raptortechnique guide wrong.
Reverse it and now its a perfect fit.

Cheers

David

[G-DAVE]

Your not the first and you certainly won't be the last to do that.
Glad to be of help.
Dave