Announcement

Collapse
No announcement yet.

begginer, need help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • begginer, need help

    ok i got my heli yesterday, i got a Twister V2 exactly the same as the E Sky honey bee i believe.

    anyway i set it up how the DVD tells me to, but every time it lifts off the ground it does something totaly different, it seems impossible to controll, seems to drift off to the left and smash in to anything thats any where near by.

    im on yo my 4th battery charge and already the hub broke, and the tail boom thing has snapped!

    any one got any tips on how to set it up and get the hang of it?

    how do i set the gyro mixer thing up it has 2 screws on it, wher should they be?

    any help would be apprechiated!

  • #2
    Drifting to the left is normal on takeoff, you have to put a small amount of right aileron to counter the movement just on liftoff. The hardest thing is not to over compensate with the controller you need only small inputs on the sticks otherwise you just pendelum from side to side. Dont think there is anything wrong with the heli, believe me its very difficult to start flying a heli, but perservere and the hobby is brill.
    Dave sigpic Proud owner of an E G S
    T-Rex 500ESP FBL Beastx
    T-Rex 450SE V2
    Futaba 7c 2.4ghz
    Cell-Pro Power Lab 8 & Cell-Pro 10S

    Comment


    • #3
      I have a Humming Bird V3 , once I had mastered the fear of getting of the ground above about a foot you find yourself out of the ground affect ( tubulance from the roatar blades) and it becomes much more manageable to control , these little choppers need lighteneng reflexes and you need to learn to predict where there heading before they do or there off.
      REGARDS JAMIE

      Knight 50,50 hiper,hatori pipe,gy401+9254,ttcarbon blades futaba ff7fast 2.4 ghz set up with 3152 digi s all round and a rev loc 10
      450 rex standard setup
      Phoenix sim...
      Plus two gliders and one pits special biplane

      Comment

      Working...
      X