FlightPower Battery Wiring

[Steph]

Hi, anyone know which wires are which on a Flightpower 4s EVO 20 3700 mah battery with the ten pin grey connector? Thanks in advance.

[gazza]

Depends what you want to know
I can tell you how to wire a cellpro balance lead in if thats what it is....

[Raptormadsteve]

Depends what you want to know
I can tell you how to wire a cellpro balance lead in if thats what it is....

Hi Gazza ere can you help me as well! i have the same problem lol... want to do a 3 cell flightpower to use with cell pro?
Regards Steve

[MartinM]

Black 0 ve
Grey/white 1st cell
Violet/blue 2nd cell
green/yellow 3rd cell
orange 4th cell

Hope that helps !

Martin

[gazza]

Well thats the 3S heres the 4S

Brown- Not used, cut it & heatshrink it shut.
Red & Orange - -Red lead on cellpro tap
Green & yellow- - 1st white wire on cellpro tap
Purple & blue - - 2nd white wire on cellpro tap
Grey & white - - 3rd white wire on cellpro tap
Black - - Black wire on cellpro tap

TAKE VERY SPECIAL CARE WHEN SEPERATING THE WIRES INTO PAIRS ON THE FLIGHTPOWER RIBBON.
IT HAS TO BE DONE VERY, VERY CAREFULLY WITH A SCALPAL & THE RISKS OF SHORTING THE PACK ARE VERY HIGH IF GREAT CARE IS NOT TAKEN!!!!! Ask me how I know

[MartinM]

Gazza that was the 4 cell !!

[gazza]

Gazza that was the 4 cell !!

I do apologise didn't read it properly & assumed you were responding to Steves request for 3 cell

Steve, If it's one of the new flightpower 3S series then you are probably better off buying the polyquest to cellpro adaptor board from Mike.
No carving up required then & you can always revert back to V balancer etc if you need to should the cellpro 4S charger pack up.

[Steph]

Well thats the 3S heres the 4S

Brown- Not used, cut it & heatshrink it shut.
Red & Orange - -Red lead on cellpro tap
Green & yellow- - 1st white wire on cellpro tap
Purple & blue - - 2nd white wire on cellpro tap
Grey & white - - 3rd white wire on cellpro tap
Black - - Black wire on cellpro tap

TAKE VERY

Cheers Gazza and Martin for the info, just to confirm for my 4S it's the configuration above for wiring in to the Cell Pro 4s??

Thanks

Steph

[gazza]

Yes Steph thats correct, the exact same way as mine are wired for use with the 4S Cellpro charger.