Any Good Heli Set Up sites on the net?

[Nutz]

I would advise carbons, just that I had and ARK blade come off once at speed........very very scarey, oh and it screws the tail up!

Then again ARK where made out of very nasty white brittle plastic.

[Ade_Law]

hi martin, hows things dood, long time no speak

setup your pitch curves as the following

-6, +1.5,+9 in all flight modes

set the throttle curve to give you 2500+ rpm constant from 1/4 stick upwards this will probably be something like 0, 75, 90, 90, 90

forget idle ups for now.

forget normal mode its like having a V8 and switching off half the cylinders!

Ade

[easyRobin]

Hi,

There are some really good videos on building and setting up a T-Rex 450.
And I'm sure they work for pretty much all electric micro helis.
They really helped me!

The link is here: http://www.helifreak.com/viewtopic.php?t=12455

Cheers,

[jimbob]

I knew someone would know better than me...

[robgt]

I've got an align or a castle creations 25

If you have the data cable, programming the CC25 becomes very easy as you download the software and set everything on your PC - then upload it to the ESC. If not, you'll need to program it manually (in the same way as the Align ESC - though I do not know what settings you need to make manually?).

Depending which Align ESC you have, there will either be 4 or 5 settings you need to make.
You need to identify which ESC it is, then go here and view the setup options for your particular ESC.

Cheers,
Rob