Help Please

[GTTRIS]

Ive brought a Futaba t7cp ff7 and im trying to figure out what setting's i will need on the tx for my Twister 3d storm,
Swashplate Type?
Mixing Setting's? can i use the setting's in the heli manual for the 9cap
Any other settings i might need to change because ive reset the memory in the tx so im starting a fresh.

[Paulo uk]

Hello, I think that tx will allow you to select HR3 or possibly SR3 (120° cyclick servos).

HTH,

Paul

[David Drew]

Hi,

I don't think you will need mix.

But - and I don't know that heli - when you select a swash type that isn't exactly right you can reverse some servos to get it to work properly. Especially CCPM swash plates.

It's quite often a case of fiddle until it works.

Best of luck.
David

[GTTRIS]

Thanks yeah the options on the tx are h-1 h-2 he3 hr3 h-3 hn3
ive reversed the servo's as the manual for the 9cap

[smokingtommy]

yes it is a 120 swash so you will need to select HR3 and yes you can use some of the info in the manual for the FF9 i dont know this heli well although i have flown one once
to get a better understanding of what you are doing i would strongly recomend looking at the vid here
Trex 450 SE and general build videos are here - HeliFreak
and look at CCPM part 1and part 2 also Pitch and Throttle Curves
also if you do as much as you can i would still find a model shop near you to get it set up right this will save you time and money
http://www.jperkinsdistribution.co.u...s/6600090b.pdf

[smokingtommy]

reversing the servos on the tramsmiter per manual will not mean it is 100% right as you may find the servos are working in the wrong direction the ccpm vids will show this and how to sort it
there is quite a few clubs near you so may be getting in contact with some one from one of these may help you as well also the guys on here
http://www.bmfa.org/clubs/clist.php

[GTTRIS]

Thanks everyone ive now got it setup as the manual for the 9cap so im gonna have a go tomorrow to see if everything works as it should

[daveg2]

remember on the storm you pull down on the swash plate to get positive pitch