what to put in a knight 50!!

[fatmantom]

hi
i am going to get a knight 50 a soon as i have the money.
my problem is i dont no what to put in it, i need to keep it as cheap as possible as i am only 14 and dont have alot of income but i also dont want a load of crap that i will have to keep replacing. I think i want the gyro and servo combo 401/9254. i hav'nt a clue on any other parts that i want or need (i dont want to do 3d with it)
thanks

[Ade_Law]

3x futaba 3152 for the CCPM
1x 3001 for the throttle
a 2000mah sub C pack
heavy duty switch
your choice of PCM rx to suit your transmitter

Ade

[fatmantom]

i dont have a transmiter lol
could you suggest a reasonable good, fair priced one

[Disc]

i dont have a transmiter lol
could you suggest a reasonable good, fair priced one

Futaba 7c about 100 pounds from inwoods or al hobbies

For the money you won't get a better Tranny.

[fatmantom]

how much will what ade put cost?

[sidy2001]

4 x Futaba s3152 servos £88, futaba heave duty switch£5.75 both from sevo shop.a Futaba 9ch RX D/C PCM receiver £84.99 a sub C battery is £20 all plus postage.
Hope this is of some help

[fatmantom]

so if i have added it up correctly i could get a complete knight for around £500?

[ChrisB]

If you shop wisely it should be under £600

[Steve]

Don't forget the engine.

OS 50 Hyper is very good. The normal OS 50 SXH isn't far behind it either and a bit cheaper. Get the Hyper if you're into 3D. Get the normal if you're not.

[Ade_Law]

7c is good but if you can afford it the 9c is worth it.

Ade

[ChrisB]

[QUOTE]Don't forget the engine.QUOTE]


Whoops i did,make that around £750,from that you should have a bit of change

[fatmantom]

i included the engine in my ading up i guessed it was around £150 am i rite

[fatmantom]

dam looks like i have some serious saving to do

[flatspins]

I`d definatley go with the OS engine.
They only do the 50 Hyper now, the 50 sxh has been discontinued.