Tweet
I have had a couple of accidents with my belt cp tearing the thread on the fly bar holder as I am sure most people have. The most annoying thing there is you have to buy a whole new head upgrade to replace the see saw fly bar holder and they are only drilled and tapped on one side, and why can't you buy just the flybar holder on its own. Well I bought myself a 9BA tap and drilled the opposite sides of the fly bar got longer screws and low and behold it works. Why don't esky drill and tap both sides of the flybar holder to enable the thing to be reversed in case of an accident its just a money making thing. The thing to do is to use longer screws than those supplied as they are too short and rip the threads straight away, they only have to be 1mm or so longer than the originals. Hope my idea helps people save money. If you want to know where I got my taps send me an email. they cost me £5.00 for a set of 3 delivered.
Keith
Keith