What to do?

[Ade_Law]

if you are on a budget you can pick up dongles for less than £10 that will work with AccuRC, theres a list here;

https://docs.google.com/document/d/1...it?usp=sharing

Ade

[carpman]

if you are on a budget you can pick up dongles for less than £10 that will work with AccuRC, theres a list here;

https://docs.google.com/document/d/1...it?usp=sharing

Ade

Cheers for the above I can only find 1 available on Amazon and that was the frisky xsr and that was over £32.

To be honest, unless I can get the program ACCU Rc working properly, I'm not going to throw good money after bad.

Sim Issues (maybe poor setup, I don't know as there is very little info in the way of guides)
Trying to fly blade 130 as its the nearest to the 230s.
TX calibration is done getting 4 axis checked in INPUT Settings/Device
Functions, Normal good, Idle 1 and 2 adjusted and set, throttle hold adjusted and set, NO input for dual rates or rescue.

1, no negative pitch in idle up 1 or 2
2, you only have to touch aileron and heli rolls in all flight modes
3, no panic/rescue.
4, no dual rates. Not that I can tell but from above no input.

If I go to workbench and put on pitch gauge on in idle up 1 throttle off = +7, Idle up 2 = +10

Anybody help with the above...

[Ade_Law]

quickest way to get this sorted is to drop the AccuRC fb page a message, I need to check some things with your setup and fastest way to do that is instant messages.

https://www.facebook.com/accurc.simulator/

[carpman]

quickest way to get this sorted is to drop the AccuRC fb page a message, I need to check some things with your setup and fastest way to do that is instant messages.

https://www.facebook.com/accurc.simulator/

All done as requested Ade

[Ade_Law]

got it and replied a couple of days ago, you dont seem to have looked at it yet tho :-)

[carpman]

got it and replied a couple of days ago, you don't seem to have looked at it yet tho :-)

on the system now going to have a look at the suggested video

[carpman]

Latest news, With Ade_laws help and perseverance and patients, of course, we finally got through setting up Accu RC. I did have to spend some extra money on the new ws2000 dongle because we were having trouble with the align hardwire connection twitching like hell, Following on from setting up the sim myself and Ade had a discussion about some of the tech and the way it is setup. SO all that leaves is for me to say Cheers Ade.

[Ade_Law]

no problem, all part of the service :-)

Ade