Announcement

Collapse
No announcement yet.

Blade 500

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    At the moment I've dropped it to 80 and 30 expo on all but it is still very lively

    Comment


    • #17
      Starting on a 500 size collective pitch is a bit of a challenge! Perhaps check out the flight school vids ...

      How To Fly RC Helicopters
      Tom
      sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
      SAB Goblin 630 Competition
      - Castle Edge 120HV, vBar Neo
      Blade 700X - Castle Edge 160HV ESC, Mini vBar
      Logo 550SXv2 - Castle 130LV ESC, vBar Neo
      .... and a Gaui X3
      Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims
      ... and two EGS'



      Comment


      • #18
        Originally posted by wouldbeflyer View Post
        At the moment I've dropped it to 80 and 30 expo on all but it is still very lively
        I honestly doubt it is with those settings! Where are you? Have you looked for a local club you could visit? Get the heli checked over by an experienced flyer?
        Tom
        sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
        SAB Goblin 630 Competition
        - Castle Edge 120HV, vBar Neo
        Blade 700X - Castle Edge 160HV ESC, Mini vBar
        Logo 550SXv2 - Castle 130LV ESC, vBar Neo
        .... and a Gaui X3
        Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims
        ... and two EGS'



        Comment


        • #19
          Maybe I'm just too old,seemed like a good idea at the time.I'm in Chatham,Kent

          Comment


          • #20
            Originally posted by wouldbeflyer View Post
            Maybe I'm just too old,seemed like a good idea at the time.I'm in Chatham,Kent
            Never too old! You're just starting with something that many would have worked towards! I flew my first 500 only after I'd progressed through a fixed pitch micro, then a 450. I was a fairly competent flyer before I braved a 500. That said, the bigger the heli, the more stable it normally is so whilst a 500 is quite intimidating, it should be fairly tame at the controls.

            You said you'd converted it to flybarless yourself? Probably worth getting somebody experienced to check it! I think there are other people on this site from Kent. I suggest you start a new thread asking for local help!
            Tom
            sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
            SAB Goblin 630 Competition
            - Castle Edge 120HV, vBar Neo
            Blade 700X - Castle Edge 160HV ESC, Mini vBar
            Logo 550SXv2 - Castle 130LV ESC, vBar Neo
            .... and a Gaui X3
            Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims
            ... and two EGS'



            Comment


            • #21
              I think I must have seen them all now,it is so frustrating..It does fly,but only where it wants to go

              Comment


              • #22
                I went to my local club meeting with my MCPX bl and spent an hour or 2 getting to grips with it and now i can control it in my garage.The advice was great but the 500 is too big for this meeting as its indoors.You did it right, my purchase was spur of the moment

                Comment


                • #23
                  Originally posted by wouldbeflyer View Post
                  I went to my local club meeting with my MCPX bl and spent an hour or 2 getting to grips with it and now i can control it in my garage.The advice was great but the 500 is too big for this meeting as its indoors.You did it right, my purchase was spur of the moment
                  But an experienced hobbyist would still be able to check it over. Make sure the curves were all right, that the FBL unit was configured correctly with the right amount of pitch etc. They'd also probably be able to hover it (even in an indoor meet) to make sure it wasn't overtly twitchy. If you can fly an mcpx, a 500 should be easier once you get past the fear factor.
                  Tom
                  sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
                  SAB Goblin 630 Competition
                  - Castle Edge 120HV, vBar Neo
                  Blade 700X - Castle Edge 160HV ESC, Mini vBar
                  Logo 550SXv2 - Castle 130LV ESC, vBar Neo
                  .... and a Gaui X3
                  Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims
                  ... and two EGS'



                  Comment


                  • #24
                    I just cannot find how to start a thread

                    Comment


                    • #25
                      You said it,it terrifies me.Came to get me a couple of times.Seriously ,It would be good to find a local like minded soul ,on your todd carries loads of risks and errors

                      Comment


                      • #26
                        I have looked but have not been able to find how to post a new thread.I just want to ask if any flyers living near Medway would give me some guidance.Not the weather for it really but I am mad keen

                        Comment


                        • #27
                          Originally posted by wouldbeflyer View Post
                          I have looked but have not been able to find how to post a new thread.I just want to ask if any flyers living near Medway would give me some guidance.Not the weather for it really but I am mad keen
                          You need to be in a subforum to start a thread. Either click on "forum" across the top menu and select one that is appropriate (main discussion or beginners I would suggest). Or from the home page - you can click on a subforum on the right hand side next to existing threads (the column is marked "home", next to "views" and "replies").

                          Once in a subforum - there is an obvious "new thread" button near the top of the page!
                          Tom
                          sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
                          SAB Goblin 630 Competition
                          - Castle Edge 120HV, vBar Neo
                          Blade 700X - Castle Edge 160HV ESC, Mini vBar
                          Logo 550SXv2 - Castle 130LV ESC, vBar Neo
                          .... and a Gaui X3
                          Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims
                          ... and two EGS'



                          Comment


                          • #28
                            I was in a similar position back in November (I had just started with a little msrx and mcpx). I joined Eynsford club in January and also go to the indoor club at Ashford (only £3 for the evening - very good).
                            I live in Maidstone so both are roughly the same distance from me. If you are want any local help give me a PM - I'm no expert but I have already had to do a fair bit to my 450x!
                            It is a bit daunting going it on your own - I'm not flying with any pals or anything either but I have meet a few people who are local so have some more options now of who and where to go flying with.

                            If you are in Chatham I think you said then you are only down the road (Im in Penenden Heath - so only 1 min from the M20/A229).
                            I can fly the micro's (msrx, mcpx and 130x down at the Heath) if you ever want to go with someone - but the 450 upwards really need to be in a safe place!

                            Chris

                            Comment


                            • #29
                              Hi Chris,I sent you a private message,did you get it mate
                              Martin

                              Comment


                              • #30
                                Yes' sorry tried to reply this morning but phone didn't send it!
                                replying now....

                                Comment

                                Working...
                                X