Charger plug?

[sargan]

I have a CellPro Mulki 4 charger .. works fine for my main packs ...

Also have 2 x NiMh packs for my Spektrum transmitter - which I would aslo like to charge with CellPro.

Anybody know of an adapter lead to allow these to be plugged into CellPro Multi4 or even a line plug that will fit the packs line socket, and I can make up my own lead.

I attach 2 pics of the packs .. if that helps ...

[10x]

Hello
I bought one of these leads for my spectrum lipo tx battery, looks the same plug.

Quantum Spektrum Tx Charge Adapter For NiMh Or Lipo Q-CL-0036

[Rich23]

Hey

I believe this is what you need

Quantum Spektrum Tx Charge Adapter For NiMh Or Lipo Q-CL-0036

Rich

[sargan]

Thanks guys ... that looks like it.

Only issues is I have T-Type plugs & sockets not banana plugs .... be a shame to cut off those nice gold banana plugs ... dod you know if I can get the 'spektrum' plug anywhere ,,, either on a bare lead or with a T-Type socket fitted

[rugbymud]

Hi Sargon I made one of these leads to go to my xt90 plugs , if you get a male lead end from a radio system remove the outer guard shield, then remove the signal wire from the plug and rest of the lead , then solder to your connectors.
I would just say be extra careful when plugging in red to red, black to black!

[Ian_R]

You need a JST-EHR lead like this;

JST-EHR Female lead.