Announcement

Collapse
No announcement yet.

Next step

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Next step

    I carnt believe I'm asking already but is the blade msrx a good next step from the coaxials I have been flying I have been looking at a couple second hand

    the look good for indoors but I could also take it when I take the s33 out

    cheers beforehand for any help
    Syma s107g
    syma s33
    blabe msrx
    blade mcpx v1
    hubsan x4 v1
    align 450 clone
    spektrum dx6i
    pheonix v3

  • #2
    If you're still not sure the hobby is for you (so you don't want to invest in it), then I'd go for the heliguy Atom FP. Click here

    It has the same control layout as a true hobby grade helicopter (mode 2 - throttle and rudder on the left stick, cyclic on the right), it's cheap, and you can get spares for it.

    You'll be able to fly it indoors for hover practice, but it might be a little on the quick side to do circuits indoors unless you've very careful. Same could be said of the mSR X though for that matter.
    Current fleet: Goblin Thunder Sport (700), Trex 700L, Logo 600, Specter 700, Henseleit TDR, V-Baaa control.
    Next heli: I have pretty much everything I want. Maybe I'll upgrade some electronics or something.

    Comment


    • #3
      I'd say no personally. If you've outgrown the Coaxial you got yesterday, you'll outgrow a FP Heli in a week.

      You need to get a CP Heli, something that will teach you the principles that ring true even with something like a Trex 700 sized Beast.

      The Blade MCPX is mentioned daily from what I can see. Even better, get the brushless version.

      BLH3680UK | E-Flite Blade mCPX V2 BNF UK

      Get yourself one of these and a second-hand DX6i Transmitter, and you're sorted

      Comment


      • #4
        I have had the coaxials about a week but they are very slow just think I could manage something abit better

        I am not bord of them yet I still havnt had a proper flight with my new one
        Syma s107g
        syma s33
        blabe msrx
        blade mcpx v1
        hubsan x4 v1
        align 450 clone
        spektrum dx6i
        pheonix v3

        Comment


        • #5
          Also that atom has a fly bar doesn't it so wouldn't be very good out side
          Syma s107g
          syma s33
          blabe msrx
          blade mcpx v1
          hubsan x4 v1
          align 450 clone
          spektrum dx6i
          pheonix v3

          Comment


          • #6
            The fact it has a fly bar is nothing to do with whether it's any good outside. Pretty much all RC helicopters used to have fly-bars up until a couple of years ago.

            The fact it's small, self stabilising, and fixed pitch are the reasons it's not very good outside. The mSR X wouldn't be much better outdoors. That doesn't self level

            While I think the mCPX suggestion is a valid one, it's much more expensive than going the Atom route. Also, I guarantee you that if you stick with the hobby, you'll want to ditch the DX6i as soon as possible.

            Almost all at my club have had a DX6i (including myself) and the only people that still have them fly non-Spektrum radios on their main helicopters and have a DX6i to fly Blade mirco helis.
            Current fleet: Goblin Thunder Sport (700), Trex 700L, Logo 600, Specter 700, Henseleit TDR, V-Baaa control.
            Next heli: I have pretty much everything I want. Maybe I'll upgrade some electronics or something.

            Comment


            • #7
              Having had a play with a quad. I think that it might be a better budget friendly thing.

              Just bought a hubsan x4 to mess around with indoors and the garden.

              Whilst it's not a true helicopter its a lot closer to the handling than a coaxial

              Sent from my Nexus 5 using Tapatalk
              www.accurc.com
              adrian@accurc.com
              This is an apple free zone
              anybody can be an Arsehole, it takes real commitment, dedication and a whole lot of effort to be nice.

              Comment


              • #8
                Mcpx RTF can be had for £96 from Rc Model Centre if your willing to push your budget. It does unfortunately only come with a channel TX.

                http://rcferret.co.uk/UK/Index?search=BLH3500UK2

                or Msrx RTF for £60 from FL and SMC

                http://rcferret.co.uk/UK/Index?search=BLH3200
                Last edited by debrooker; 27-12-2013, 09:40 AM.

                Comment


                • #9
                  I would suggest msrx, saying that I had the mcx coax then the Heliguy atom, then got the msrx and boy did the msrx feel a handfull, I was scared to fly it. I went back to it the other day and it feels so easy by comparison to a full CP heli. As I said I had the heli guy atom but bought this the other month (v911) to fly indoors and its quite nippy for a fixed pitch, very cheap and I can't seem to be able to break it even by smashing full speed into a wall.


                  https://www.youtube.com/watch?v=BwB7...e_gdata_player


                  Sent from my Nexus 4 using Tapatalk
                  Last edited by Ritchieme; 27-12-2013, 09:38 AM.

                  Comment


                  • #10
                    The msrx rtf for £60 seems cheap like I would rather get one that comes with a good receiver for the future
                    Syma s107g
                    syma s33
                    blabe msrx
                    blade mcpx v1
                    hubsan x4 v1
                    align 450 clone
                    spektrum dx6i
                    pheonix v3

                    Comment


                    • #11
                      I think you mean transmitter, That's a good price but if you get hooked you will ditch the tx on your next purchase the tx with the rtf is very very basic which is reflected in the low price, although certainly good enough to start with you can't go wrong at that price.

                      Comment


                      • #12
                        Originally posted by bigpops View Post
                        The fact it has a fly bar is nothing to do with whether it's any good outside. Pretty much all RC helicopters used to have fly-bars up until a couple of years ago.
                        The fact it's small, self stabilising, and fixed pitch are the reasons it's not very good outside. The mSR X wouldn't be much better outdoors. That doesn't self level
                        ..
                        True, but the small fixed-pitch like the Atom, or Blade 120SR, or Blade mSR (not mSRX) use a 45-degree flybar - which is what gives that self-stabilising behaviour. The flybars you mention are "normal" 90-degree flybars which don't provide self-stabilising characteristics.

                        The mSRX, being flybarless, is much better placed to handle wind, and doesn't have the self-correcting nature of helis like the Atom. Personally, I think it's possibly the best fixed-pitch heli for this reason. I wish I'd got it instead of the 120SR that I started with.

                        The mSRX is a good heli in my view, certainly for somebody coming from a co-axials.

                        There are other options though, and depending on your confidence, the mcpx (v2 rather than the brushless BL) is the next step being collective pitch.

                        If one can find an mSRX with a computerised radio like the DX6i, it will provide a good start for most.
                        Tom
                        sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
                        SAB Goblin 630 Competition
                        - Castle Edge 120HV, vBar Neo
                        Blade 700X - Castle Edge 160HV ESC, Mini vBar
                        Logo 550SXv2 - Castle 130LV ESC, vBar Neo
                        .... and a Gaui X3
                        Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims
                        ... and two EGS'



                        Comment


                        • #13
                          That's what I want realy the dx6i but the rtf package is realy cheap I just carnt make up my mind
                          Syma s107g
                          syma s33
                          blabe msrx
                          blade mcpx v1
                          hubsan x4 v1
                          align 450 clone
                          spektrum dx6i
                          pheonix v3

                          Comment


                          • #14
                            try a 450 e flite if the budget will stretch, also it think like the blade 400 it comes with a DX transmitter which will do you on to a few more models, you might want some training gear on I though. plus you an get down the local club it.
                            its full of meaty goodness
                            GAUI NX 7 V Bar silver line
                            Align T Rex 700 F3C Flybarred
                            Align T rex 600 le DFC Vbar blue line
                            SAB Goblin 570 Kontronik jive + pyro
                            450 pro DFC

                            Comment


                            • #15
                              Originally posted by Markmark.123 View Post
                              That's what I want realy the dx6i but the rtf package is realy cheap I just carnt make up my mind
                              If that's what you want, go for it! In all honesty, if you really like this hobby and you get hooked, then the cost of the mSRX RTF will soon seem like peanuts. For example, the mSRX RTF with basic TX is what? - £60/£80 (genuinely don't know off the top of my head). The last battery I bought for my 550 cost pretty much the same (well £60).

                              If you get the mSRX and you enjoy it, happy days. If you find it's not for you, sell it on! Bottom line is you'll have only spent a small amount of money.

                              Get anything bigger - eg. 450 class, and you're looking at a few hundred quid to get you started, and the learning curve is MUCH shallower - you will progress slower as a crash will hurt, and that fear will hold you back.
                              Tom
                              sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
                              SAB Goblin 630 Competition
                              - Castle Edge 120HV, vBar Neo
                              Blade 700X - Castle Edge 160HV ESC, Mini vBar
                              Logo 550SXv2 - Castle 130LV ESC, vBar Neo
                              .... and a Gaui X3
                              Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims
                              ... and two EGS'



                              Comment

                              Working...
                              X