overshoot on pitch pumps?

[exiged]

Got my 700e flying nice thanks to input from you guys regardint the tx setting on bx.

Only issue i have now is when doing pitch pumps the heli seems to want to carry on a little further down even after ive started applying positive pitch,as if its overshooting.

ive got -12/0/+12 and a straight linear pitch curve 0-100 as per the manual in idl2.collective seems smooth from top to bottom and ive tried a flat line throttle curve of 100% rather than my usual v-curve.

Ive tried adjusting pots 1 and 2 and lowering increasing/decreasing the control behaviour.any other ideas?

thanks!

[Cuppa]

Have you got all cyclic tva the same? if you turn up the aile and ele to say 110% do'nt forget to do the same on pitch. also imo nice at medium=red menue H perameters menu p/boost.

[waveydavey]

I would say in fairness that it's pretty normal for a heli to take a little while to reverse, I wouldn't have said it's anything to do with the Beast but more to do with the blades.

Are they the same blades as before and did it do this flybarred

[exiged]

Thanks for the replies.cuppa yes all atv the same but ill try lowering the pitch boost like you said.

davey it did it a little previously on 3gx so you could be onto something with the blades.its always been FBL using align 3G blades...

[exiged]

Thanks for the replies.cuppa yes all atv the same but ill try lowering the pitch boost like you said.<br><br>davey it did it a little previously on 3gx so you could be onto something with the blades.its always been FBL using align 3G blades...

[Dudifiedad]

If you are running the BEASTX then defiantly turn the pitch boost to medium. Makes a huge difference

[exiged]

Pretty much sorted!.put the pitch boost back down to medium from its max setting (was getting some pitch up in flight) and went through a full heli set up again to get blue led's where required.Its flying nicely now,thanks!.

[NEON ROTORS]

program your heli to have more positive than negative .e.g. +12 -10