Tweet
hi i am looking to put beastx v3 on my trex 700n just reading through the manual and i cant find wot the swash plate frequency and tail servo frequency should be on. i am currently running align ds610 on cyclic and align ds650 on the tail help!!!! 
-
-
Some helis were damaged during the making of this signature.....
sigpic RCHA - Guinness World Record Pilot 2011/12/13 Central Model Helicopter Club -
-
Make sure you use the correct servo guide for the firmware version you're on (ie 1, 2 or 3) as the light settings have changed through the version numbers
Harry
Mikado Logo 700 | VBar Neo | JR HV Servos | Pyro 750-50L | Kontronik Kosmik 160HV + buffer pack|
Thunder Tiger G4 E720 | CGY760 FBL | BLS272SV + BLS276SV | Align 800MX Dom 440kv | Kontronik PowerJive 120HV + Opti UltraGuard |
SAB Kraken 580 6S | Spirit FBL | BLS173SV + BLS276SV | HK4025 1100kV | Kontronik Kolibri 140LV + Opti UltraGuard |
And a pillow for the doghouse...
Powered by Futaba 18SZComment
Comment