AR7200BX + MultiGov Pro + Switchglo + DSX9

[crash-alot]

I changed my beastx for a AR7200BX but now I'm stumped on how the get my AR7200BX, Multigov Pro and Switchglo to work together on my DSX9. It worked fine with the beastx but the AR7200BX forces you to use the Gear channel for your gyro gain which on a X9303/DSX9 means you loose your Governor menu.


Does anyone have the same combination and got it to do the following?:
1. Governor selecting different head speeds on F.Mod switch
2. SwitchGlo selectable on Aux2 switch to avoid hot starts

[Chris Boughton]

Hi i just forund this video, i might help

[Spanner]

I'm a bit stumped with this too.

With BX and separate RX I could run the BX, governor in the governor menu and gyro from the Gyro sens menu and all was happy!

Now replaced the BX with the AR7200BX.

Now adjusting in the governor menu alters the tail gyro gain, and adjusting in the gyro sens menu adjusts the governor %age!!

If I disable governor mode, I can now use endpoints in the gear channel but lose out on the governor function..........

any ideas, anyone overcome this yet?