Hi all, need some advice.... relatively new to nitro heli's and my mate sorted me some 'Model Technics Coptamix 10' fuel for the OS50Max engine. Question is can i use this fuel in an OS46LA plank engine? Last time I flew the plank....several years ago.....i used 'firestorm 5%' fuel. I ran it the other day...new NIMH's and updated RX ....but it wouldn't rev. It ticked over quite merrily for ages but open throttle...cut out!!
When i stored the plane last I used after run oil and i've turned the engine over regular.
I used the old fuel as it was in a sealed container and wasn't sure whether the Coptermix was right to use. I read somewhere that as long as the moisture can't get into the fuel, It would keep...is this a myth?
Am i going to need a seperate fuel to fly the plank again? It doesn't get much use so it would be good to just use 1 lot of fuel.
Cheers in anticipation.
When i stored the plane last I used after run oil and i've turned the engine over regular.I used the old fuel as it was in a sealed container and wasn't sure whether the Coptermix was right to use. I read somewhere that as long as the moisture can't get into the fuel, It would keep...is this a myth?
Am i going to need a seperate fuel to fly the plank again? It doesn't get much use so it would be good to just use 1 lot of fuel.
Cheers in anticipation.


and some BMFA Certs
Comment