Announcement

Collapse
No announcement yet.

LHS Fuel Availabilty

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by The Manager View Post
    You won't go wrong with Bekra 16% or there abouts, and it's kind to your engine bearings.
    If Bekra is good enough for Mark Christy, then it should be good enough for anyone IMHO.

    I use ProPower mainly due to price and availability which has just got better from my LHS

    Almost changed fuel myself which I don't really want to do so I say go for the Bekra 16 as its your local brew.

    Cheers

    Mark
    sigpicx2

    Airskipper 50 - For sale

    Comment


    • #17
      Originally posted by Dedcalm View Post
      whats the flying hours for a Sunday?
      I beleive it's 10 until 2 on a Sunday. let's put it this way - I have always been down at 10 and flown. I'll be there shortly after 10.

      Hope to see yu there.



      Oh and I got some Optifuel, an Optifuel CNC cap and an Align pitch gauge.

      Is it just my gallon container, or do the lids not fit securely on Optifuel containers? Bloody dangerous if you ask me - all the containers I tried were no more than a push fit. The cap was too large for the container thread.
      Martin

      Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

      Comment


      • #18
        I popped into the OptiFuel stand at Wings n Wheels and had a chat with their marketing chap - also picked up a bottle of 20% for £20 I too have found the lid to be somewhat loose and slightly leaky! Ah well, at least is cheap and runs well (apparently)
        Rob


        T-Rex 450 Pro - BeastX v3 FBL, Hitec 5065's, DS520, Futaba R6203SB
        Quad x-copter - KK 5.5 Multicopter v4.7, 850KVA motors, 30A ESC's, Orange RC FASST Rx, Carbon & Alu frame, LED strips for orientation, 10x4.5 props.
        Quad x-copter - KK Plus 5.5d, 1000KVA motors, 30A ESC's, Orange RC FASST Rx, GF & Alu frame, LED strips, 10x4.5 props (coming soon!)
        Futaba 9CP & 10CG

        Comment


        • #19
          Defintely loose, mine popped off on the back seat, but its £22.50 for a full 5 litres so im sure ill survive
          x 3

          Comment


          • #20
            Originally posted by sacko View Post
            Defintely loose, mine popped off on the back seat, but its £22.50 for a full 5 litres so im sure ill survive
            Indeed. However, had it not have been a new case with the blank in the top, you may not have survived, especially if you're a smoker.

            Martin

            Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

            Comment


            • #21
              I am pleased to say that I had my bottle in the front of the car being managed by the wife during the looong drive home from WnW. If it had been in the boot (estate) then it might have been a very different story especially was the windows were closed with aircon on re-circ. I might actually have a chat with Optifuel next week to mention the issue to them as I think its quite a serious one IMHO.

              Didn't catch you at the field today Martin, I got there (after checking the flying times) at about 11:45 and flew/chatted till 14:00 great day although the wind was swinging about 270 degrees at times during my flights... had a dumb thumb moment when turning nose in on a slow circuit and pushed the stick the wrong way, quickly recovered though and took a few mins of tail in hover to calm the nerves
              Rob


              T-Rex 450 Pro - BeastX v3 FBL, Hitec 5065's, DS520, Futaba R6203SB
              Quad x-copter - KK 5.5 Multicopter v4.7, 850KVA motors, 30A ESC's, Orange RC FASST Rx, Carbon & Alu frame, LED strips for orientation, 10x4.5 props.
              Quad x-copter - KK Plus 5.5d, 1000KVA motors, 30A ESC's, Orange RC FASST Rx, GF & Alu frame, LED strips, 10x4.5 props (coming soon!)
              Futaba 9CP & 10CG

              Comment


              • #22
                Hi Rob

                Must just have missed you. I think I was on the road at about 11:40! Sods law eh?

                One day we will meet!

                Martin

                Most of the Aligns, fair few Spektrum bits, bunch of Align & HiTec servos, OBE, VD & Bar.

                Comment

                Working...
                X