My heli setup is as follows:
VBAR blueline full size with 2 X Spektrum satellite receivers
Align 3G head
Align 600D blades
Align DS610 servos on the cyclics (using the 6 armed servo horns on the centre hole).
Align DS620 on the tail (using the 4 armed servo horn 3rd hole out). Also one turn in on the rudder control rod link from 0 degrees neutral for the vbar's mechanical tail setup requirements.
Align DS620 on the throttle (moved one hole out on the servo horn).
Align 2 in 1 regulator/ glow start
Align magnet governor sensor
OS50 Hyper engine with Outrage HR50 muffler
Collective pitch in software is setup for 12.5 degrees
Has a nice solid feel and I did have the cyclic gains up to 90 without any adverse effects. From the initial setup file to this final setup stage I have resolved an issue I had with the governor and also the tail during tail-down inverted funnels.
Hope this helps!