tail blade length
Is the lenght of the blade measured from the tip to the hole for the screw in the holder or is it from tip to root?
I am trying to order replacement blades for my trex 600N, it has KBDD orange blades on at the moment which have a few chips out of them. measuring them they are 96mm from tip to hole and 104mm from tip to root and the root is 5mm thick. if anyone could advise please,thanks
Sean
any ideas anyone, I am hoping to get these ordered today thanks
NHP 92'S on my 600
Have also used Align 95's
RCHA World Record Pilot 2011
RCHA World Record Pilot 2012
Leicester Heli Flyers
Leicester Model Aero Club
Some helis were damaged during the making of this signature.....
Hi,
Normally all blades are measured from the blade tip to the bolt hole but there have been a few exemptions to this over the years.
On a 50 or 600 class machine you need to be looking around the 92mm/95mm/96mm Tails. On a Trex 600N it would require 95mm/96mm Tails.
Hope this helps!
Thanks!
Rossco
Synergy N5C / Synergy E7 / Synergy E5
Synergy R/C Helicopters / Rail Blades / / Scorpion Power Systems / Fast-Lad Performance
Equipment for Sale:
MS 710 Night Blades & Charger
Cheers guys I ordered both sizes anyway want to get back in the air as soon as possible the weather has been really kind this week so trying to get as much air time as possible.
Thanks
Sean
Posting Permissions
LinkBack URL
About LinkBacks
Reply With Quote
Bookmarks