Thread: problems installing Align 3GX

Could someone out there point me in the right direction with the problem I'm having with my 3GX.I have a Spektrum module fitted to a JR 9303 transmitter when trying to do the inital set up with the 3GX unit with the two satellite units fitted it connects to the 3GX unit and lights up the satellite units but also locks all servos in different directions and you can't move them and the throttle servo is moving the horn with little movements.

Have tried changing the swash mix without success.

Originally Posted by batbow

Could someone out there point me in the right direction with the problem I'm having with my 3GX.I have a Spektrum module fitted to a JR 9303 transmitter when trying to do the inital set up with the 3GX unit with the two satellite units fitted it connects to the 3GX unit and lights up the satellite units but also locks all servos in different directions and you can't move them and the throttle servo is moving the horn with little movements.

Have tried changing the swash mix without success.

You have either crossed wiring on your servo connections to your receiver or your TX settings could be incorrect

You have either crossed wiring on your servo connections to your receiver or your TX settings could be incorrect

I have the same issue. Did you ever find the answer? I have read that the 3GX is not compatible with the JR module.... :-(

Hi,

Yeah I am. Looking around it appears that it is to do with my transmitter. I have a JR3810 with a spektrum module in it. Align 3GX Binding Issues With JR? «

It is to do with the resolution of the transmission. I will have to use a separate receiver. It appears to work ok at first glance. Apart from the rudder which doesn't move in the correct fashion.