Announcement

Collapse
No announcement yet.

Setting up

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Setting up

    Quick question when flying the Trex450 and everything else one of the controls is reversed the cyclic pitch I think it's called on the right stick,when I push forward to go forward the heli rears up backwards and when I pull back on the stick it tilts the swash forward.Any suggestions as to correcting it please.
    Gary
    Align Trex 450se With Copterx head
    Fusano Airwolf kit
    Phoenix sim

  • #2
    Reverse the servos on channels 1, 2 & 6 until the servos all move in the right direction. This will be in a Tx menu called 'Reverse' or similar.

    When you push the left stick forward all servos should push the swash plate up. Down & the swash should go down, on the right stick pushing it left & it should tilt left & right it should tilt right.

    David
    Happy Landings.
    David

    Winner of SEVEN of the BEST (Eddie Gold Stars)...humbled!

    Raptor 50. OS50
    Century Bell 47G in Yellow - Beautiful!
    Mcpx
    Blade 130x
    Goblin 500

    Comment


    • #3
      Could also be the swash setup, would help to post what TX you are using

      Swash should be set to single servo for Phoenix
      Pass the Zap!

      Medevac with 950 Revo's - always makes me smile Whatever the weather
      T-Rex 450 SE V2 - GY401 with S3154, HS65's, Maniac Blades, 2100 Revo lipo's and a DX7/AR7000
      Phoenix

      Comment


      • #4
        Set to single servo?? ok sounds weird but what do I know.Any chance as to why though please.
        As for the tx it's a JR x-388s, I set up a new model on it and left everything as default.
        Last edited by edison; 30-04-2008, 09:28 PM.
        Gary
        Align Trex 450se With Copterx head
        Fusano Airwolf kit
        Phoenix sim

        Comment


        • #5
          Gary I believe it is because Phoenix doesn't need a TX mixed input or something like that, set the swash type to single servo and that should sort it
          Pass the Zap!

          Medevac with 950 Revo's - always makes me smile Whatever the weather
          T-Rex 450 SE V2 - GY401 with S3154, HS65's, Maniac Blades, 2100 Revo lipo's and a DX7/AR7000
          Phoenix

          Comment


          • #6
            Sorted out flying great now cheers.For the moment!
            Gary
            Align Trex 450se With Copterx head
            Fusano Airwolf kit
            Phoenix sim

            Comment


            • #7
              Good to here Gary.

              Good isn't it
              Pass the Zap!

              Medevac with 950 Revo's - always makes me smile Whatever the weather
              T-Rex 450 SE V2 - GY401 with S3154, HS65's, Maniac Blades, 2100 Revo lipo's and a DX7/AR7000
              Phoenix

              Comment


              • #8
                Yea mate it is very good and I was the one who paid £73.55 for it off E-Bay as mentioned in that other thread,but hey at the end of the day it's cheaper than buying new parts for real and when I've finished with it I will sell it at a loss but that's the name of the game.
                One thing about the sim if you can help,When the heli ( all of them) get in the air they move sideways straightaway ( left ) is this due to the rotor blades?
                Gary
                Align Trex 450se With Copterx head
                Fusano Airwolf kit
                Phoenix sim

                Comment


                • #9
                  Tail rotor pushes them that way, as you get used to it you will automatically compensate for it
                  Phil
                  "Be who you are and say what you think...
                  Because those that matter...don't mind...
                  And those that mind... don't matter"


                  Blade 130x, Park Zone Mini Sukhoi, EDF F16 thingy, some Gliders and some broken stuff

                  Comment


                  • #10
                    Cheers Smoothhound. Is the sim very close to what will happen in real life as I did a move on the sim which I kinda like for getting out of trouble,probably been done a thousand times by everyone but you gotta start experimenting at some stage.
                    Gary
                    Align Trex 450se With Copterx head
                    Fusano Airwolf kit
                    Phoenix sim

                    Comment

                    Working...
                    X