Thread: Velocity / Fusion owners, a quick favour please.

Ive just got a new Velocity N2 and I'm not too happy with the fact that the canopy pushes on to 4 rubber gromets rather than the old way of thumb screws on the V2 & Fusion. My new canopy is already starting to crack from being forced on & off despite liberal amounts of grease and Ive only flown it a couple of times.

So I'd rather go back to the old style screws & I'm thinking that I could fit the canopy stand offs from a Fusion or V2 but as they are in slightly different places on the frame I'm not sure they'll fit, so I wonder if someone could measure theirs for me. I'd like the distance from the break away tab to the end of both the front and back ones please.

They are :

43mm rear
&
30mm front

Dan

my fusion is a push on type fitting, no thumb screws here, just make the holes a tad bigger dude

They are really really tight, i'm going to have a look at mine as well to see if will be easy enough to make the holes slightly bigger

I use these on my fusion.

HERE

The thumb screw stays in the cano grommit

No problems here with the push on type, make sure to ca glue the inside of the canopy about an inch around the hole

if your feeling flush you could purchase some quick uk magnetic canopy mounts. They work brilliantly on my 600 and 6hv and no more cracks

Originally Posted by danch

They are :

43mm rear
&
30mm front

Cheers Dan thats perfect, I'll measure mine up in the morning and get some ordered up.

Originally Posted by squeaky pete

my fusion is a push on type fitting, no thumb screws here, just make the holes a tad bigger dude

I did try and reem them out a bit Pete but they seem like a much harder rubber than the older kits had on them so you get to a stage where they go on easy but dont feel like theyre going to stay on when the going gets tough!

if you want a set of trex 700 QUK magnetic mounts to mod then hit me up, i have a brand new set here.

cheers

Originally Posted by raptorheli2

if you want a set of trex 700 QUK magnetic mounts to mod then hit me up, i have a brand new set here.

cheers

Yea I'll give them a go mate, let me know what you want for them.

Canopy reamer!

Best tool I ever brought just don't over do it

Originally Posted by Gate88

Yea I'll give them a go mate, let me know what you want for them.

sorry mate, i just thought as a last gasp i'd try them on my new e7 and what do you know, PERFECT fit.

cheers

Originally Posted by raptorheli2

sorry mate, i just thought as a last gasp i'd try them on my new e7 and what do you know, PERFECT fit.

cheers

Ha! No worries fella I'm not sure theyd work anyway because of the angle of the holes!

if there is ANY angle they do not work. i tried to get them on my vel 90 but no go. thankfully it looks like the 30 quid was well spent now on the E7.

cheers