Tweet
As above, my 700 came with DSM2 satellites. Are they ok to use or do I really need to move them to DSMX?
They are connected to a Mini VBar 5.3 Pro
They are connected to a Mini VBar 5.3 Pro
-
-
Dsm2 fine, if using dsmx use hi res when binding.Santander Factory Team
Proud wearer of 5 x EGS -
Great thanks!
I do have dsmx satellites but one is used and has scratches
so not sure I want to use it.
Plus I can't be bothered to change them over at the moment.Comment
-
They will be fine, had a picture change at lastOriginally posted by muscleflex View PostGreat thanks!
I do have dsmx satellites but one is used and has scratches so not sure I want to use it.
Plus I can't be bothered to change them over at the moment.
lol
Santander Factory Team
Proud wearer of 5 x EGSComment
-
^^haha. you noticed that already?!Comment
-
The difference between DSM2 and DSMX is (to the best of my knowledge) mostly about improving the frequency hopping to ensure against clashes with other models. I believe this is particularly aimed at the indoor / micro market with sometimes there can be upwards of 10-20 models flying simultaneously.
For large helis, where the chances are it's just you, or maybe one two others flying, I believe DSM2 is absolutely fine.Tom
sigpic Synergy E7SE - Kontronic Helijive 120+ ESC, vBar Neo
SAB Goblin 630 Competition - Castle Edge 120HV, vBar Neo
Blade 700X - Castle Edge 160HV ESC, Mini vBar
Logo 550SXv2 - Castle 130LV ESC, vBar Neo
.... and a Gaui X3
Spektrum DX8 ; Mikado VBC ; RealFlight 7 & neXt sims ... and two EGS'
Comment
-
Dont forget 22ms on dsm2 and 11ms on dsmxOriginally posted by tomatwalden View PostSantander Factory Team
Proud wearer of 5 x EGSComment
-
so if I just bind a DSMX it might go at 22 rather than 11 unless I choose 11ms? is that right? I just got my first DSMX rx.
There is no issue with DSM2 unless there are a gazillion models flying on 2.4. The world RCHA record last year had many models on DSM2 (including mine) and there was no issue and we had well over 100 (or was it 200+) fly at the same time (someone will say how many).
There was I think one model that failed to bind on switch on - not sure what type of radio it was.www.heli-extreme.co.uk a good club in south Sheffield
600n pro BeastX Align DFC head bls251, 3xbls451, align gov, 600d, 2in1
trex500, BeastX DS510 swash, Beast X cutr and carve head DS520 HK3026-1900, Align 425D blades, 5S4200 rev'trix, K&BDD dampers, AR6200
"450" superframeSTK, align DFC head v2tail, hk22281-8 on 3S 9650w9257gear commander 55A align 325D hitec digitals Tarot ZYX, AR6100e
MCPX kbdd tail and blades, miniaviation bats
Dont spend more flying models than it costs to fly for realComment
-
Your tx will no, but when binding Vbar select hi res otherwise will be 22ms on this I believe.Originally posted by moyesboy View PostSantander Factory Team
Proud wearer of 5 x EGSComment
-
Brian I've got one 700n with ar7200bx dsmx on 22ms on the other 700n on ar7000 dsm2 22ms???Originally posted by GIXERMAN View PostRegards
SimonComment
-
So you 700n can be changed in tx too 11ms if supported in beastx, and ar7000 is 22ms, the newer ar7010 is 11msOriginally posted by Goshawk View PostSantander Factory Team
Proud wearer of 5 x EGSComment
-
Will that require a re-bind? Or do you select it on when you set model up from scratch??
also look at my wire setup thread to see if I've got it rite please??Regards
SimonComment
-
Just rebind to be safeOriginally posted by Goshawk View Post
ar7000 has 1024 on it which means 22ms
ar8000 has 2048 on it which means 11msSantander Factory Team
Proud wearer of 5 x EGSComment
-
So quick recap if it has
2048 is 11ms ie dsmx ar8000 dsmx ar6210 ar7600 dsm2
1024 is 22ms ar6200, ar7000Santander Factory Team
Proud wearer of 5 x EGSComment
-
Hey.Originally posted by GIXERMAN View Post
The higher resolution is one reason why I would use DSMX sats in Hi-Res mode if you can.
.Ian Contessa
Robbe SchluterUK / Midland Helicopters / Align
Coolice Power Supplies
Coolice Custom Built Charge Case'sComment
Comment