Tweet
Hi can anyone help please, I'm quite new to heli flying I have a trex 600 electric recently crashed and rebuilt. Since the rebuild the tail nods up and down from about half throttle upwards, has anyone any idea what might be causing it please.
-
-
this could be down to many reasons ..
1 being bent spindle shaft
2 being dampening to hard
3 not having enough headspeed for head
4 if your running dfc head then you will need to pump the head speed up -
[hi. Thanks very much for the advice, I still have the problem! so I will try your suggestions. I'll let you know how I get on,many thanksQUOTE=Gaza-Davies;1121929]this could be down to many reasons ..
1 being bent spindle shaft
2 being dampening to hard
3 not having enough headspeed for head
4 if your running dfc head then you will need to pump the head speed up[/QUOTE]Comment
-
what kind of head speed your running .. and to check if you spindle is bent .. take one blade off and put a allen driver into the bolt and turn it if you see your other blade move up and down it is bentComment
Comment