Tweet
Hi all, is anyone else having trouble getting the dfc ball link onto the dfc linkage rod? I snapped my ball link in a little ploughing accident so ordered a set of '3.5x8.25mm' ball links which is what the manual says, but someone seems to be lying. They just don't seem to want to screw in. The old one appeared to have a fraction larger hole, is this a manufacturing thing or do I just ram the rod in !!
-
Hi all, is anyone else having trouble getting the dfc ball link onto the dfc linkage rod? I snapped my ball link in a little ploughing accident so ordered a set of '3.5x8.25mm' ball links which is what the manual says, but someone seems to be lying. They just don't seem to want to screw in. The old one appeared to have a fraction larger hole, is this a manufacturing thing or do I just ram the rod in !! -
Phew panic over, screwed a servo rod into it to get it started, then screwed the linkage rod in. Not sure if I found any of the threads align put in, think I just made my own!! -
TBH, never had a problem myself.Comment
-
Thanks Obi i'll send you some of mine so you can join the club. They did fit, but it was a tight fit, not as easy as they usually go on. Just wondered if it was a sizing issue.Comment
-
The first ones to come out from Align were like that very tight to screw on" as mine did but had plenty of spare ones from my 250se that fitted perfect.Today's outlook is fine for flying.- Spektrum DX18 gen2, Phoenix Sims, Align MR25XP.
- Blade Nano, mCP X, 130x, Blade 180, Mini T 450se
- Trex 250dfc Gpro, Trex 500EFL Gpro.
- Trex 600E Gpro DFC, Trex 600NSP now Gpro, DFC, Redline 56
- Flickr Through My Pictures.
- A helicopter is an aircraft that is lifted and propelled by one or more horizontal rotors because Wikipedia said so.
Comment
Comment