Tweet
Im having problems with initializing my vbar when I turn it on. Every time I connect the EC5 I get a broken connection on my vbar log and the sats blink. It never use to do it until recently. I have manged to initialize it once 5 mins a ago and then checked the vbar log and showed no problems. What can I do to fix this problem? Should I put a switch in?
-
-
are you running it through a speed controller could be a faulty wire to that try wiggling the wires to the esc/regulator. I had a similar problem when i repaired a fellow members heli that you would plug battery in and all ok then would lose connection turned out to be a broken wire to the esc cut the wire resoldered the ec5 back on and all ok
Comment