Tweet
DX6i binding query ?
Before I try my Trex 450 I have been practicing with a Blade mCX2 using the 4 channel transmitter that came with it, it says in the handbook that I can bind it to my DX6i transmitter, if I do this will I still be able to use the transmitter that came with the mCX2 ?
-
Phoenix
mCX2
Trex 450 sport -
no as the model will be model matched to the tx.you would have to rebind to the 4ch one.but you can use it on the simTrex 550e dfc :-)
Sab Goblin 500 Sport/dx8 and 9
t-rex 450s x2 /Raptor 50
blade 130x 3off/mcpx x2 180cfx times 2
multiplex acromaster 3d (great fun) acrowot,sonic wing,Graupner junior 2mtr glider,beast biplane .
kyosho spree small plank
bogey combat plank x2 woop
http://www.cuffleymfc.co.uk
brian OB2proud owner of 3X E.G.S+ 1boggy special star
-
Yes...the worst that will happen is that you have to re-bind the old TX
Neil
1 x
Raptor 30, OS32, on its way to being FBL (and leccy?)
Trex 450 Pro, Beastx, Savox 0257, DS520
Blade 180CFX
DX9 & DX7
Too many planks...Comment
-
And no...not if you bind one and then try to use the other next flight...didn't quite read the Q properly
Neil
1 x
Raptor 30, OS32, on its way to being FBL (and leccy?)
Trex 450 Pro, Beastx, Savox 0257, DS520
Blade 180CFX
DX9 & DX7
Too many planks...Comment
-
thanks for info guys, will leave it alone, cheers TezzPhoenix
mCX2
Trex 450 sportComment
-
The usual thing is to use one tx. Use the dx6i for everything. You will just have to select different model memories for each model and probably the sim as well.Flasher 450 Sport. Assan GA250 with 520 tail servo, MKS DS450 cyclic.
Multiplex Cockpit Tx, DX7, DX6i
Blade 130-X, MSR, MSRX
Phoenix SimComment
Comment