Tweet
Just checked the event log on my mini vbar on my logo 6003d and found loads of data framing errors.
Did a quick search and found a common cause is static. However, the heli fitted with the anti static kit? I will put some silicone spray on the belt to see if it disappears next time I fly but thought static to be unlikely with the kit fitted. Are there any other things I should be checking? Motor is scorpion 4035 500, jive 80hv esc, futaba 6203 sbus receiver one power lead into mini vbar and one into the sbus and ferrite rings on both leads from the jive. Servos are bls451 and bls251.
Cheers
Dan
Did a quick search and found a common cause is static. However, the heli fitted with the anti static kit? I will put some silicone spray on the belt to see if it disappears next time I fly but thought static to be unlikely with the kit fitted. Are there any other things I should be checking? Motor is scorpion 4035 500, jive 80hv esc, futaba 6203 sbus receiver one power lead into mini vbar and one into the sbus and ferrite rings on both leads from the jive. Servos are bls451 and bls251.
Cheers
Dan
Comment