Announcement

Collapse
No announcement yet.

3GX help

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • 3GX help

    just bought a 3GX ime trying to set up on a DX7

    when entering dir mode it wont go into the second set up of E LIM swashplate and i dopnt know why
    can you help

  • #2
    Hey.

    Are you running the latest V2.1 firmware?
    While in DIR mode have you gone through and setup the cyclic pitch and collective pitch range, at the same time making sure all controls move as they should do?

    Before moving onto the next step the collective/throttle stick on your transmitter needs to be at the mid stick position, which you may already be doing. From here a single press of the set button on the 3GX case top should move the led onto the second position.

    If the above still does not work, perhaps try updating the 3GX again to V2.1 using your PC and the link cable. Then enter DIR mode and follow through the remaining steps.
    .
    Ian Contessa
    Robbe SchluterUK / Midland Helicopters / Align



    Coolice Power Supplies
    Coolice Custom Built Charge Case's

    Comment


    • #3
      Hi ive just updated to v2.1 but it still wont go into E LIM to forward reverse the swash

      is there anything i need to do in the dx7 that could be stopping the dir mode

      ive been flying beastx for 1 year now so ime familliar with the dx7 settings but that doesnt meant its the same for the 3GX

      Comment


      • #4
        Originally posted by agh321 View Post
        Hi ive just updated to v2.1 but it still wont go into E LIM to forward reverse the swash

        is there anything i need to do in the dx7 that could be stopping the dir mode

        ive been flying beastx for 1 year now so ime familliar with the dx7 settings but that doesnt meant its the same for the 3GX
        Hey.

        Just so we're on the right track, so you cannot get the E.Lim light to turn on yes? I'm reading your reply and it's got me thinking if you're trying to reverse the elevator gyro direction while in E.Lim, not seeing it reverse and so wondering what's wrong.

        In E.Lim you need to put your cyclic stick full forward, the status led on the 3GX flashes rapidly, I hold the cyclic there for a few seconds, then allow the cyclic stick to return to neutral and the status led turns solid red off the top of my head.
        With this done you can advance, using the rubber button on the 3GX top face to the next E.Rev option, which will allow you to change the elevator gyro sense direction.

        Another thought, have you started from a blank model memory in the transmitter?
        .
        Ian Contessa
        Robbe SchluterUK / Midland Helicopters / Align



        Coolice Power Supplies
        Coolice Custom Built Charge Case's

        Comment

        Working...
        X