Announcement

Collapse
No announcement yet.

Spartan Quark / Gyro Setup

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Spartan Quark / Gyro Setup

    Hi,
    It's just occured to me that I've never setup the gyro on my 450 or the 250 correctly in the Tx!!
    So a bit of help would be much appreciated...
    I'm setting up the 250 first as I havent put my spare Quark on the 450 yet but I imagine it's exactly the same settings more or less...

    Futaba 8FG Gyro Settings:

    I beleive that is right?
    The Quark is set to AVCS mode (blue light)

    Any help greatly appreciated
    MTB -Marin HT | Intense SS2
    Various Gliders + 8FG. 450SEv2 & 250SE.
    Tags: None
  • #2
    Anyone?
    MTB -Marin HT | Intense SS2
    Various Gliders + 8FG. 450SEv2 & 250SE.

    Comment

    • #3
      Over 50% gain is AVCS (heading hold), so if your TX goes from 0 - 100, then below 50 is Rate mode and above 50 is Heading Hold.

      Comment

      • #4
        Means nothing to me!? Im completely lost when it comes to setting this up
        If I go into my Gyro menu on my 8FG, anything OVER 50, the gyro flashes red, anything BELOW 50 it flashes BLUE... so thats opposite to what you said...

        Someone must have an 8FG to help me set this up... PLEASE!!!
        MTB -Marin HT | Intense SS2
        Various Gliders + 8FG. 450SEv2 & 250SE.

        Comment

        • #5
          Flashing? I think you must mean steady.

          Anyway, having just done this with this combination, I didn't have to invert the channel, but is that what you did in the end? I also set it normal/normal on the screen you show and then used the 50% mark as a guide as suggested above. Inverted or not just move further from 50 in the direction of blue to increase HH gain
          Mark
          ----
          Raptor 50 Titan SE
          MCPX
          But my favourite toy is still my *black* Suzuki GSXR1000 K8

          Comment

          • #6
            Set type to GY and select either AVCS (heading hold) or normal (rate), it should appear on the right of the GY.
            You will need to set this for each condition (normal, idle1, idle2, etc) if you have your gyro linked into your idle logic switches or programmed to change off a different switch.
            Invertix 400
            Vortex 285
            TBS Discovery Endurance
            X4 II
            Schluter Champion Longranger
            G4 E720
            G4 E720 Big AIR edition
            Goblin Urukay super slow
            Goblin 700 KSE Slow
            Goblin 700 KSE Fast
            Srimok Faifa
            Spectra G
            Synergy 766
            I'm not controlling it, just preventing it from crashing
            http://mangled-rc.com/

            Comment

            Previous template Next
            Working...
            X