Could you let me know what supplier you used for the Depron,
what electrics did you fitted ie motor, esc, lipo size etc..

i'll get all the info together and post it later on

Warning not heli related so don't kill me!- My Mig 29 Depron rc plane plans pdf free

Thanks look forward to it. :D

[URL="http://www.giantshark.co.uk/a22089-2200kv-outrunner-brushless-motor-p-405610.html"]A2208/9 13A 2200KV Outrunner Brushless motor[/URL]
[ATTACH=CONFIG]58826[/ATTACH]

this is motor i use. if you want more power use the one below

[URL="http://www.giantshark.co.uk/221206-2200kv-brushless-outrunner-motor-p-402397.html"]2212-06 28A 2200KV SP Brushless Outrunner Motor[/URL]
[ATTACH=CONFIG]58827[/ATTACH]

for the esc you can just go for a 30a one

[URL="http://www.giantshark.co.uk/speed-controller-p-405437.html"]RC Max 30A ESC Speed controller[/URL]

[ATTACH=CONFIG]58829[/ATTACH]

if you use the smaller motor this 18a one will be fine

[URL="http://www.giantshark.co.uk/speed-controller-p-405436.html"]RC Max 18A ESC Speed controller[/URL]

[ATTACH=CONFIG]58828[/ATTACH]

now for servos

these do the job fine, they are light and small

there are metal geared equivalent servos if you want

[URL="http://www.giantshark.co.uk/towerpro-sg90-micro-servo-p-268.html"]Towerpro SG90 9G Micro Servo[/URL]

[ATTACH=CONFIG]58830[/ATTACH]


for tape hinges i recommend this tape, it is expensive but works brilliantly

[URL="http://www.amazon.co.uk/gp/product/B001VEJB7W/ref=pd_lpo_k2_dp_sr_3?pf_rd_p=103612307&pf_rd_s=lpo-top-stripe&pf_rd_t=201&pf_rd_i=B001HBWEFA&pf_rd_m=A3P5ROKL5A1OLE&pf_rd_r=1FB9FZHDZFJND5QAJ2DB"]Scotch Original Packaging Tape on an Easy Start Dispenser, Clear, 50mm x 20m (E5020EU) - 1 pack: Amazon.co.uk: Office Products[/URL]

[ATTACH=CONFIG]58831[/ATTACH]



you can get some of the electronics cheaper at hobbyking but giantshark is based in the uk so delivery is quick

if you need anything else just ask


for making pushrods this is my video

[video=youtube;5Om6rC8_yp0]http://www.youtube.com/watch?v=5Om6rC8_yp0[/video]