Announcement

Collapse
No announcement yet.

Jr pcm9x

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Jr pcm9x

    High folks am all new to this rc world but am enjoying it to.right I have a raptor 30 with jr 591 servos my problem is what receiver will I need to go with my handset that is compatable with the servos to or will I have to change servos to match a new receiver Hoe u can help.

    Regards keith

  • #2
    Keith

    Basically, you need any 7 channel 35MHz PPM receiver, or a JR SPCM 7 channel receiver.

    Your transmitter works on PPM and PCM modulation, you decide in the settings. PPM is common across all makes, so a JR transmitter will work with a Futaba receiver on PPM mode, provided of course they are set on the same frequency. However, for peace of mind, I would stick to a matching make and use a JR receiver - that's always how I did it in my 35MHz days.

    PCM is manufacturer specific, and is safer as it includes a failsafe facility. Only a JR PCM receiver will work with your transmitter.

    Don't worry about servo compatibility - they just work, no issues with any type of receiver.

    Just to add - I think you'll struggle to buy any new 35 MHz receiver gear these days, but might be wrong.
    Last edited by Steve; 21-03-2012, 11:20 PM.
    JR Vibe Fifty fb (YS56)

    Comment


    • #3
      I have some 7 channel 35meg receivers for sale all in very good codition let us know if it greeted pm me your number & I will call you cheers Lui
      Trex 700 Ltd & Fury Extreme 90 both top spec
      Trex 600 super nitro pro fully loaded / 550e V2 fully loaded
      Trex 500 ESP & trex 450 pro kitted out to the max
      Loads more models to many to list !!! plenty over 180MPH !!!
      Comp Arf Flash Jetcat 120se / Graupner Harpoon 11 Evojet90 & Boomerang Elan Jatcat 120se JET's
      Full Composit Krill Katana DA 100cc fully loaded / Hangar 9 Carden Yak DA50cc fully loaded
      Alex F5b x2 / Voodoo & Vip pylon racers just a few of my mega collection !!!

      Comment


      • #4
        Thanks for that Steve helped me a lot

        Comment


        • #5
          Hi lui what price you looked for might need more channels like an 8 or 9 channel if u have one regards keith

          Comment

          Working...
          X