Announcement

Collapse
No announcement yet.

600e pro Beastx, my tail is wobbling slowly.... what to check??

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    600e pro Beastx, my tail is wobbling slowly.... what to check??

    Iam not satisfied with my tail.


    Its pendling slowly about 10cm more or less... in normal mode at 2000 rpm its of corse worst, but also in idle up at 2235 rpm its still there.


    Iam using stock DS650 on tail, with Beastx... and 102mm KBDD blades on.


    My gyro gain in DX8 is at about 45%


    I have the V2 tail on and upgraded it to V2B... but did not help


    Mechanical setup, is all ok....


    What to try???
    Tags: None
  • #2
    Have you tried different ball positions on the servo? I had a simular issue and moved the ball out to maximum seemed best. My dx7 gain is about 72% with the ball at 14mm from centre. I only have the v2A tail and im happy with it now.
    Also its worth mucking arround with the tail dynamic dial 3 on the beast. The 600 pro needs a high head speed for best performance of the tail even with 102mm blades
    T- Rex 600 EFL PRO, KontroniK Jive 80HV, Outrage TORQ HV Servos, Skookum bus, BeastX V3, Rail 606
    T- Rex 500 ESP, KontroniK Koby 90LV, 500MX, EFL V2 Pro Head, BeastX V3, S9254
    MCPX2, Pheonix, DX7,Thunder power G6 lipos, TP 820 CD
    Happy Flying! Stan

    Comment

    • #3
      Try mounting the Bx on a diffrent pad. I find the stock pads are crap!!!! Might help

      Also try highering and lowering the gain by aound 5-10% and see if that helps!!

      Click to visit RC Hero or visit       www.rcheroflightteam.co.uk for the flight team blog.

      Comment

      Previous template Next
      Working...
      X