Announcement

Collapse
No announcement yet.

Vibe 50 and v-bar

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    Vibe 50 and v-bar

    Hi setting up a friends vibe 50 with v-bar and need some advice.

    Head is set up fine and moved ball links in and I tried to fly it today but any stick movement was accentuated and felt like it was being pulled by invisible wire and almost uncontrollable.

    Cyclic gain is set at 80 and running v5 as not yet upgraded to v5.1 My 550 is set at 80 across the board and flies rock solid, do you think the cyclic gain is too high? Also not being a nitro flier myself what gyro pads are you using ie metal plates etc?

    Any advice would be gratefully recieved as I need to get this heli flying.

    Thanks
    Banjo Boy
    Tags: None
  • #2
    For nitro I use the Spartan grey tape metal plate and Spartan White tape this helps reduce vibes also gains are different for all helis my velo 90 is on 72 my 700 is 90 and my fusion 50 was 63 so go figure ??? Try lowering it and see what happens
    Kel Velocity 50 sk-720 ,Fusion 50 v-bar pro 5.2 ,Velocity 90 v-bar pro 5.2 & JR DSX11 ,Phoenix and a fridge full of bottled water RCHA Courier Services PM for Details www.parcelshipper.co.uk and www.impactexpress.co.uk

    Comment

    • #3
      Kel thanks for the reply just realised I have posted this in the wrong forum!

      Will lower the cyclic gain to 60 and change the mounting of the sensor and see how it goes.
      Banjo Boy

      Comment

      • #4
        What head are you using , is it the JR one with the mixer arms on the blade grips ???????

        x Rachel ps I will move it for you.

        Comment

        • #5
          Its the JR head with the mixing arms on the blade grips.
          Banjo Boy

          Comment

          • #6
            I use either the metal plate or 2 layers of number plate tape.

            What are the vibes like on the Spektrum Analyser, I would guess there is a vibration somewhere along the lines.
            x 3

            Comment

            Previous template Next
            Working...
            X