Announcement

Collapse
No announcement yet.

N 5 tail drift

Collapse
X
Collapse
 
  • Page of 1
  • Filter
  • Time
  • Show
Clear All
new posts
Previous template Next
  • #1

    N 5 tail drift

    Hi everyone this unit starting to bug me now ! i carnt stop the tail drifting nose right changed pads straps and checked all the usual things anyone else had this problem
    Tags: None
  • #2
    not really familier with that system, but have you got trim on radio or subtrim on rudder, any vibrations maybe
    Santander Factory Team

    Proud wearer of 5 x EGS

    Comment

    • #3
      only the the normal vibes out of a nitro ? just creeps around slowly

      Comment

      • #4
        remount the gyro on harder tape or try and velcro it down.

        nose right is "normally" too soft on the mounting.

        nose left is "normally" too hard.

        cheers

        Comment

        • #5
          taken it down to one tape and strapped it up this has helped but still drifts just slower do you a metal plate between would help ?

          Comment

          • #6
            what gyro is this?

            have you setup normal mode?

            anything to change the mass is worth trying.

            add the metal plate and try again.

            what your doing is trying to move the gyro out of the frequency it is currently in. if it was me that had this i would go with 1 thin pad and work upwards.

            cheers

            Comment

            • #7
              Originally posted by raptorheli2 View Post
              what gyro is this?

              cheers
              I believe that it would be a CY TotalG as it is in the TotalG Flybarless controller Forum!
              Happy Flying! Thanks - Dave
              Sponsored by my own hard work and my good friend's Visa & Mastercard.
              GAUI NX7 / OS105HZ-R / Powerboost Pipe/ Spartan Vortex VX1N
              GOBLIN 770 / Scorpion 5025-440 / YGE160 / Spartan Vortex VX1N / GensAce 14S Baby!!
              Curtis Stingray500 - FPV Pylon racing

              Comment

              • #8
                just checking!

                i'm on idog at work so i only check the main page :-) thats my excuse anyway!.

                the above still applies anyway, i'm not sure how sensitive the total g is to normal being setup but always worth a punt.

                cheers

                Comment

                • #9
                  Originally posted by extreme 3d View Post
                  Hi everyone this unit starting to bug me now ! i carnt stop the tail drifting nose right changed pads straps and checked all the usual things anyone else had this problem
                  Just PM Buzzin Brian on here of via Helifre*k he is very helpfull tell him I said hi

                  PS sounds like a poorly set up linkage center point no offence ment

                  x Rachel

                  Comment

                  • #10
                    running 2/3 degrees of pitch at center with all the servos horns/linkages centered ?
                    plenty of posts on freak about this problem.

                    Comment

                    Previous template Next
                    Working...
                    X