Thread: You stock mikado parts...

... Apart FL and Midland?

Thanks


Sent from my iFonzie
using Tapatalk

I don't stock them i'm affraid.

check out model heli service, click the link below, they might hav what u need

I'll have a look in my spares box.

Do a search for any companies across Europe if you cannot find the parts locally, that way your purchases will have been subject to VAT so you won't have to worry about any further charges. If the parts cannot be found then check further a field. If you have got to have something and you have to pay VAT on a personal import then so be it.

Are you after anything in particular?

Originally Posted by Evo Andy

Do a search for any companies across Europe if you cannot find the parts locally, that way your purchases will have been subject to VAT so you won't have to worry about any further charges. If the parts cannot be found then check further a field. If you have got to have something and you have to pay VAT on a personal import then so be it.

Are you after anything in particular?

I got a second hand logo "700" and I just notice the tail pushrod is broken, so no control of the tail, the boom is 830 mm, so I don't know what kid of pushrod it is, so I was thinking to convert it to 3d, plus the anti static kit, the prob is Midland is cheaper that FL but doesn't have the antistatic kit and don't know when is back in stock


Sent from my iFonzie
using Tapatalk

Hi nitros, sorry buddy I have nothing that is of any help to you but now "we" know maybe someone can help.

Revolution stock all Mikado parts but due to problems with the master list I haven't got them up on the Website yet.

You could order by phone.

Originally Posted by nitros

I got a second hand logo "700" and I just notice the tail pushrod is broken, so no control of the tail, the boom is 830 mm, so I don't know what kid of pushrod it is, so I was thinking to convert it to 3d, plus the anti static kit, the prob is Midland is cheaper that FL but doesn't have the antistatic kit and don't know when is back in stock


Sent from my iFonzie
using Tapatalk

Order it with Midlands and just make your own anti static kit, its very simple to do.

Maybe I'm confused but, why don't you just order from FL? Or don't they have stock either?

Maybe a bit Extreme but you could use a length of carbon tube to make a new pushrods and just cut to length and glue some threaded rods in the end, after all that's all mikado do.

well is not really broken on one end is cracked where the rod is, so it's loose, now i put two zip ties and some treadlock, is seem ok now

Originally Posted by nitros

well is not really broken on one end is cracked where the rod is, so it's loose, now i put two zip ties and some treadlock, is seem ok now

Hi mate,

I deffo would not mess around with the tail push rod, you need to use strong expoy for that rod as it goes through a lot of flight stresses and even using 30 min epoxy is asking a lot of it I think.

That is if I am thinking about the correct part.

I just purchased a anti static kit as I wanted something more professional looking than my DIY stripped wires .

Cheers