Thread: Help re JRDSX11 Travel adjust and limit adjust in setup

Hi Guys I have just started using the new JR DSX11 (Apologies for the long winded question

Question 1
Can someone clarify what the difference is between two sections of the menu following?

1. Travel adjust H150 - L150 (with 100 suggested as a eference in the Manual)
and

2.Limit adjust which is also adjustable from H150 - L150.
The book says 1. varies the servo angle of travel
then says 2. varies the servo limits ???

**They both seem the same thing to my dumb brain???

Question 2
I have been using Rays heli setiup video on my Rappy 30 and leaving 2. above, the Limits at 150 and using his suggested 70% H and L on the throttle Travel Adjust and Pitch at 140H and L Travel adj

My throttle isnt as fast as the pitch (which he suggests a lower Throttle Travel adj than the Pitch Travel adjustment will achieve) its actually slower.....

Any ideas?? Any helpp gratefully appreciated

My achy head is thinking maybe I do the opposite?? .... but Im now Im lost
The DSX11 seems way more complex than the 9303, and not particularly intuitive.

Yes I have a DSX 11 and that bit is odd !
Make sure the centre stick equals half throttle then set the following.
I just ignore the limit adjust and use the travel adjust to set the endpoints on your throttle channel .
What you want to achieve is a fully closed throttle at zero trim ! And fully open at high stick.
Use the travel adjust to achieve this .
As for it being slower as long as its not a huge amount dont worry.

Aaah Thanks Guys I re read the manual a dozen times and assumed that might be the case but Its good to get confirmation. my old setup was all over the shop but the heli fflew well I am attempting to get it as close to properly set up as possible.