Thread: jr xg8

hi there new to this i hope some one can help me
i have a new xg8 set had a dx6i have playing with it so
i now what its all about in the trim / sub trims there is no pitch
function or aux can some one help please

i have just trid it agen still the same

What exactly are you trying to do?

What do you see on the sub-trim menu?

try to find the pitch trims setting up up my trex600
it could just be me

travel adt
thro
ch2
ch3
rudd
---
ch6
---
nedl

sub trim

thro ---
ch2 ch5
ch3 ---
rudd nedl

Hi bumps.

I've just got my xg8 setup on my 700n and 700e. ch2, ch3 and ch6 are your ccpm channels. try adjusting each one to see which is which. On mine ch2 is the right swash servo, ch6 is the left swash servo and ch3 is the elevator or centre swash servo. The 2 dashed out channels are your gyro gain and governor control channels. You need to go in through the gyro and gov menus to adjust them. the nedl channel is channel 8 or aux 3. I'm using this for a switchglow - unfortunately on a 3 position switch as the only two 2 position switches are used for hold and throttle cut. No biggy though.

hope this helps.

ben

hi every one thanks for the help all set up now sorry for get back quicker
have that bug at'sgoing around for week one more i what to play around with
an align rce6600 gove whats the best way to set it up with this tx
many thanks
pete