Thread: First few flights on the Tdr

Originally Posted by dumb thumb it

Hi matey

I am running a 13 t pinion on a gmauro hand wound pyro 535kv that gives me lots of power @ 70% throttle
It's giving me 2060rpm which is enough, 14t will be way to much for me the heli is only rated for 2000 on the head ;-)

Hi Alec, how are you? I'm happy to see that you motor run with satisfaction for you. I've one question for you, how have calibrated throttle for your jive? With 535 kv engine, 13T are very strange your headspeed of 2060 rpm. My little advice, is to test this with 14T pinion and low throttle curve. This help PWM work on jive, and governor work better....

Originally Posted by GMAURO

Hi Alec, how are you? I'm happy to see that you motor run with satisfaction for you. I've one question for you, how have calibrated throttle for your jive? With 535 kv engine, 13T are very strange your headspeed of 2060 rpm. My little advice, is to test this with 14T pinion and low throttle curve. This help PWM work on jive, and governor work better....

hi mauro

i am fine and very happy with my motor thank you for the handwind once more my friend :-). i am running 100-100 on the throttle end points due to me running bail out mode on the heli jive so i can not calibrate the end points @ 70% flat line its giving me 2060 on the head. i will try a 14t pinion and see what i get :-).

many thanks alec

i