RcHeliaddict http://www.rcheliaddict.co.uk/ Europes Largest RC Helicopter online discussion forum with videos, gallerys, classifieds and more en Wed, 19 Jun 2013 18:46:31 GMT vBulletin 60 http://www.rcheliaddict.co.uk/images/misc/rss.png RcHeliaddict http://www.rcheliaddict.co.uk/ Voice recognition lift http://www.rcheliaddict.co.uk/off-topic/97921-voice-recognition-lift.html Wed, 19 Jun 2013 18:38:57 GMT Hey All.

Just got sent this by my mate Red3 and thought you'd all like the chuckle.

I will say there is very mild swearing, but nothing to offensive for a change :congratulatory:

Let's see which link works best

http://dotsub.com/media/6c5d7514-565...e2f6509/embed/

Voice recognition lift- eleven - Transcribed | Dotsub
. ]]> Off the Topic coolice http://www.rcheliaddict.co.uk/off-topic/97921-voice-recognition-lift.html new member/flyer http://www.rcheliaddict.co.uk/new-member-intros/97920-new-member-flyer.html Wed, 19 Jun 2013 18:25:55 GMT Hi All, Richard from Derbyshire here im new to rc/helis but do abit of paragliding when the british weather is on par, but thought about... Hi All,


Richard from Derbyshire here im new to rc/helis but do abit of paragliding when the british weather is on par, but thought about getting into helicopters when the weathers right and i cant go paragliding, its just a flying bug ive got i cant get enough, any info regarding tips or good beginners helis greatly appreciated.....thanks in advance. ]]> paraglider nut 68 http://www.rcheliaddict.co.uk/new-member-intros/97920-new-member-flyer.html Align RCE-BL35P set-up http://www.rcheliaddict.co.uk/setup-advice/97919-align-rce-bl35p-set-up.html Wed, 19 Jun 2013 17:33:38 GMT I'm in the process of setting up the speed controller on my newly built HK450 and I'm using an Align esc with Turnigy 2200 3s cells. On the user manual for the Align it has two battery low voltage settings, high and middle. On high it says it monitors the cells down to 3.2v then cuts power at 3.0v, middle is 3.0v then 2.8v - these sound too low to me. At the moment I'm using my timer set to eight minutes which leaves roughly 3.4v per cell, should I just stick to this timed method? ]]> Setup Advice Fatboyslimfast http://www.rcheliaddict.co.uk/setup-advice/97919-align-rce-bl35p-set-up.html 550 sx belt tension http://www.rcheliaddict.co.uk/mikado/97918-550-sx-belt-tension.html Wed, 19 Jun 2013 17:04:13 GMT Attachment 62073 (http://www.rcheliaddict.co.uk/attachments/mikado/62073-550-sx-belt-tension-img_0356.jpg)Hi just got back from a very short visit to the field. About a min... IMG_0356.jpgHi just got back from a very short visit to the field. About a min into a flight my logo starts pirouetting wildly out of control. After the initial mid flight thought of oh S#1t this ain't gonna be pretty I manage to gain some composure, hit TH, level it out and auto it down PHEW. Anyway it seems my drive belt has jumped off the tail gear. I thought I had it set with a reasonable amount of tension before but maybe it wasn't tight enough? Would this be caused by being too slack or could it be something else? Surely it's not good to have the belt massively tight? Thanks
Attached Images
]]> Mikado Shauny http://www.rcheliaddict.co.uk/mikado/97918-550-sx-belt-tension.html My trex 600 with airwolf funkey body http://www.rcheliaddict.co.uk/videos/97917-my-trex-600-airwolf-funkey-body.html Wed, 19 Jun 2013 14:37:15 GMT


Currently being refitted and lights being added ]]> Videos Psyconn http://www.rcheliaddict.co.uk/videos/97917-my-trex-600-airwolf-funkey-body.html Looking to purchase Electric Heli http://www.rcheliaddict.co.uk/new-member-intros/97916-looking-purchase-electric-heli.html Wed, 19 Jun 2013 14:04:52 GMT Hi to all a newbie here to the forum and to Heli's, I'm looking at buying an electric Helicopter but there are just so many don't know what to choose. The ones I have been looking at within my price range are Double Horse Volitation, Skyking 8501, and a couple of others my budget could stretch to about £150 for a RTF. Thanks for any advice in advance...

Owen ]]> owenmorris http://www.rcheliaddict.co.uk/new-member-intros/97916-looking-purchase-electric-heli.html For Sale JR DS811 digital servos and csm RL10 revlock govener http://www.rcheliaddict.co.uk/sale/97915-jr-ds811-digital-servos-csm-rl10-revlock-govener.html Wed, 19 Jun 2013 13:34:01 GMT 4x Jr ds811 digital servos £65 posted Csm RL10 revlock govener (no instructions) £10 posted These are off a sceadu evo 50 nitro I am stripping 4x Jr ds811 digital servos £65 posted
Csm RL10 revlock govener (no instructions) £10 posted
These are off a sceadu evo 50 nitro I am stripping ]]> For Sale paulcobra http://www.rcheliaddict.co.uk/sale/97915-jr-ds811-digital-servos-csm-rl10-revlock-govener.html New charger?? http://www.rcheliaddict.co.uk/batteries-chargers/97914-new-charger.html Wed, 19 Jun 2013 13:25:50 GMT This question may have been done to death and I appoligise if im repeating other threads, My next big purchase will more than likely be a new... This question may have been done to death and I appoligise if im repeating other threads,

My next big purchase will more than likely be a new charger But my question is, Is it possible to balance charge my Fusion 50 packs (2 x 5s) as a 10s ( I believe that would be a series charge?), And if so what charger would people recommend??

I currently charge 2 packs together in parallel (basically as one big 5s) but would like to be able to balance as a 10s to make sure all the cells are getting a proper charge. ]]> Nick1975 http://www.rcheliaddict.co.uk/batteries-chargers/97914-new-charger.html Hello from Tewkesbury http://www.rcheliaddict.co.uk/new-member-intros/97913-hello-tewkesbury.html Wed, 19 Jun 2013 13:05:51 GMT Hi, I am new here, both to the forum and to RC Heli's.

I started in the hobby about a year ago with a Nine Eagles Solo Pro 328 RTF flying / crashing it in the garden. I then brought a Blade 120 SR RTF to fly while waiting for the spares for the Nine Eagle to turn up.

After many hours of searching the interweb thingy I came across the Malvern Heli flyers ( http://www.heliflyers.org.uk ) and started flying indoors with them, a great bunch of people who helped me progress both with my flying and my heli knowledge.

At the end of last year I convinced her indoors that we could both use a holiday in Corfu and booked us both into the RC Hotel http://www.rchotel.com for an end of season break in October.
While I was there I managed to have an hour’s lesson each day and came away with the confidants to happily hover a Raptor 30 and to start moving it around the field tail in. Again a great bunch of people and I can highly recommend them for both an excellent holiday and good flying lessons. (Will be going back again this year)

On returning to the UK, after learning the basics of Heli flying in Corfu, I had to get a larger heli for outdoor flying as well as all the other equipment Tx, charger, flight sim, etc. I have been very lucky in that Father Christmas kindly placed a Raptor E550, Dx7s and a 200 watt charger in my Xmas stocking this year.

I then had to find a club where I could progress with a larger heli. The closest club to me turned out to be Teddington Cross Model Flying Club http://teddingtoncrossmfc.co.uk which I have joined. I try to fly two or three battery’s most evenings, weather permitting, and I am getting excellent help and advice from both Cecil and Skip as well as the other members of the club.

Well that’s briefly where I am at and where I came from.

Bob D. ]]> Bob D http://www.rcheliaddict.co.uk/new-member-intros/97913-hello-tewkesbury.html For Sale Kontronik 100 lv esc http://www.rcheliaddict.co.uk/sale/97912-kontronik-100-lv-esc.html Wed, 19 Jun 2013 12:39:00 GMT Mint condition with heatsink fitted No offers thanks Will add pics tonight ;) ****SOLD***** Mint condition with heatsink fitted
No offers thanks
Will add pics tonight ;)



****SOLD***** ]]> For Sale milly0812 http://www.rcheliaddict.co.uk/sale/97912-kontronik-100-lv-esc.html For Sale Some Trex 500e Pro items BNIP http://www.rcheliaddict.co.uk/sale/97911-some-trex-500e-pro-items-bnip.html Wed, 19 Jun 2013 12:33:53 GMT Part of my 'cleaning the work desk' mission this week, I found some brand new spares for the Trex 500e Pro that I used to have but no longer have.

H50169T - Landing Gear = £4 shipped
H50082BT - Metal Tail Pitch Assembly = £9 shipped
H50023T - Feathering Shaft = £4.50 shipped

Bank Transfers only pls!

Landing Gear:
IMG_3051.jpg

Metal Tail Pitch Assembly:
IMG_3053.jpg

Feathering Shaft:
IMG_3054.jpg
Attached Images
]]> For Sale muscleflex http://www.rcheliaddict.co.uk/sale/97911-some-trex-500e-pro-items-bnip.html For Sale Gorilla Skid - Trex 450 Pro http://www.rcheliaddict.co.uk/sale/97910-gorilla-skid-trex-450-pro.html Wed, 19 Jun 2013 12:24:20 GMT Got this as a replacement and but then decided to sell the 450.
Hardly been used - Almost new I'm sure with little to no scratches that I can see. I can't remember whether I actually used it or not to be honest.
Been sealed back in the packet. More than likely I opened it and installed it then changed my mind and put it back in its packet.
£10 shipped
IMG_3047.jpgIMG_3048.jpg
Attached Images
]]> For Sale muscleflex http://www.rcheliaddict.co.uk/sale/97910-gorilla-skid-trex-450-pro.html AR7200BX - RCE-G600 Governor http://www.rcheliaddict.co.uk/beastx/97909-ar7200bx-rce-g600-governor.html Wed, 19 Jun 2013 12:18:26 GMT Anyone know which ar7200bx channel you connect the yellow wire to from the RCE-G600 Governor??? Anyone know which ar7200bx channel you connect the yellow wire to from the RCE-G600 Governor??? ]]> BeastX chadvandonkey http://www.rcheliaddict.co.uk/beastx/97909-ar7200bx-rce-g600-governor.html Sold Trex 450 Deluxe Swash Leveler http://www.rcheliaddict.co.uk/sale/97908-trex-450-deluxe-swash-leveler.html Wed, 19 Jun 2013 12:18:21 GMT Don't have my 450 anymore so this is surplus.
Just part of my 'clearing up the work desk' mission!
£5 shipped!
This is the one: DELUXE Swashplate Leveler Rave 450 TREX 450 Pro / Sport HR1132-SLV
IMG_3049.jpg
Attached Images
]]> For Sale muscleflex http://www.rcheliaddict.co.uk/sale/97908-trex-450-deluxe-swash-leveler.html For Sale Align 3GX bnib £65 Posted http://www.rcheliaddict.co.uk/sale/97907-align-3gx-bnib-65-posted.html Wed, 19 Jun 2013 11:56:02 GMT As above new removed from kit v3 £65 posted paypal gift or bt As above new removed from kit v3

£65 posted
paypal gift or bt
Attached Images
]]> For Sale GIXERMAN http://www.rcheliaddict.co.uk/sale/97907-align-3gx-bnib-65-posted.html Simstick! http://www.rcheliaddict.co.uk/wanted/97906-simstick.html Wed, 19 Jun 2013 11:10:20 GMT Anything considered :) Anything considered :) ]]> Wanted AndyThilo http://www.rcheliaddict.co.uk/wanted/97906-simstick.html new to electric , this will help http://www.rcheliaddict.co.uk/main-discussions/97905-new-electric-will-help.html Wed, 19 Jun 2013 10:41:31 GMT If like me you are new to electric understanding battery's and all the info can be alot to take in ,i was looking for some info and i came across this page and to be honest its a really good read with lots of info explained so i thought id just link it here in case some one else was interested
Understanding RC LiPo Batteries ]]> Main Discussions smokingtommy http://www.rcheliaddict.co.uk/main-discussions/97905-new-electric-will-help.html For Sale Mikado Logo 600 SX http://www.rcheliaddict.co.uk/sale/97904-mikado-logo-600-sx.html Wed, 19 Jun 2013 10:41:11 GMT Hi I have an as new condition, fully built Logo 600 SX, with the following spec: Mikado Mini V-bar upgraded to Pro Kontronik Jive 80HV ESC... Hi

I have an as new condition, fully built Logo 600 SX, with the following spec:

Mikado Mini V-bar upgraded to Pro
Kontronik Jive 80HV ESC with heatsink
Align ds615 cyclic servos
Futaba BLS256HV tail servo
Spin 600mm main blades
Edge 95mm tail blades
Scorpion HK3 4035-560 motor
12t pinion
Spektrum DSMX satellites x2
Tropical Thunder Canopy

All usual SX upgrades including new design head block, neon red fin-set, third counterbearing support with brace, upgraded main gear etc etc.

I'll add pics later.

£875 ready to fly.

Thanks ]]> For Sale t-rex pedro http://www.rcheliaddict.co.uk/sale/97904-mikado-logo-600-sx.html talon 90 cutoffs ? http://www.rcheliaddict.co.uk/speed-controllers-escs-regulators/97902-talon-90-cutoffs.html Wed, 19 Jun 2013 09:27:57 GMT I flew the 550 yesterday for the first ime with the talon 90 fitted ( Its fairly new to me and been using the std 70a align before that, without any... I flew the 550 yesterday for the first ime with the talon 90 fitted ( Its fairly new to me and been using the std 70a align before that, without any seperate bec, just until I decided on which way to go with a new esc).
The first four flight went well, gradually increasing the number of big loops, flips and rolls etc, while keeping an eye on temps (which were no more than warm). Then on the fourth flight, 30 seconds in and high, after very gently climbing out, the esc cut the power to the motor..... and down it came for my first forced auto. Luckily landed it with no damage. Good to get that one out of the way.

A quick look on helifreak revealed this as not uncomon, with one sugestion being to set current limiting as. "insensitive" rather than "normal" in the cutoffs section (I assume here that normal is default?)

it just seems a little odd, that for an esc thats sold with the 550 dfc, it decided to cut off so easily while set to normal. Somewhat ironic also, that when I change from an align 70a set up (that has many folks sucking in air throught their teeth and saying "you dont want to do it like that") to a "better" set up, it goes a little pear shaped and lets me down!

how do you folks have your talon set? or any other talon cutoff related thought appreciated.

(my setup uses 550 blades, mx motor, and as far as i know, std gearing) ]]> dogbiscuit http://www.rcheliaddict.co.uk/speed-controllers-escs-regulators/97902-talon-90-cutoffs.html Inside a full size aerobatic heli! http://www.rcheliaddict.co.uk/main-discussions/97901-inside-full-size-aerobatic-heli.html Wed, 19 Jun 2013 08:51:21 GMT I'm officially jealous of my Slovenian friend Matjaz Klemencic, who not only has his hang glider sponsored by Red Bull, but recently got to be an upside down passenger in the B0105 CB

]]> Main Discussions moyesboy http://www.rcheliaddict.co.uk/main-discussions/97901-inside-full-size-aerobatic-heli.html Align 600 EFL/PRO DFC airframe http://www.rcheliaddict.co.uk/wanted/97900-align-600-efl-pro-dfc-airframe.html Wed, 19 Jun 2013 08:49:43 GMT Just wondering if anyone has a TRex600 EFL/PRO DFC airframe for sale ? PM me if you do. Thanks Just wondering if anyone has a TRex600 EFL/PRO DFC airframe for sale ?

PM me if you do.

Thanks ]]> Wanted SamS http://www.rcheliaddict.co.uk/wanted/97900-align-600-efl-pro-dfc-airframe.html Plz plz watch Vid 2 http://www.rcheliaddict.co.uk/off-topic/97899-plz-plz-watch-vid-2-a.html Wed, 19 Jun 2013 08:45:11 GMT Daniel the human car sounds guy live @ Extreme Car Salon Sydney - YouTube

same guy another place, quality tho.

can one of the mods plz change to off topic as boggy seems bothered about it being in main discussion thanks ]]> Off the Topic GIXERMAN http://www.rcheliaddict.co.uk/off-topic/97899-plz-plz-watch-vid-2-a.html cgy750 and 14sg http://www.rcheliaddict.co.uk/futaba-cgy750/97898-cgy750-14sg.html Wed, 19 Jun 2013 08:40:48 GMT i tried my cgy750 out last night, I trimmed it in normal mode to get it to hover true, done this and toggled the switches like it says to memorise... i tried my cgy750 out last night, I trimmed it in normal mode to get it to hover true, done this and toggled the switches like it says to memorise the setting, but then I hit idle up and its all out of trim. I am using condition in dual rate for the 1st time when I normally just assign a switch. do I need to copy the trim setting in idle 1 and 2 condition or do I just put the trims back to centre after toggling the switches from normal to avcs. thanks for looking ]]> Futaba CGY750 ollie http://www.rcheliaddict.co.uk/futaba-cgy750/97898-cgy750-14sg.html Need help identifying a part http://www.rcheliaddict.co.uk/main-discussions/97897-need-help-identifying-part.html Wed, 19 Jun 2013 07:58:19 GMT I have this Kyosho Blade Balancer I bought a long time ago when I first started flying.. Anyway, I have since lost the main pole and one of the... I have this Kyosho Blade Balancer I bought a long time ago when I first started flying..
Anyway, I have since lost the main pole and one of the feet.

I need to know what the feet are called and where (if possible) I could get another one to replace.
At the moment, I'm just using a nut on it but it's too small :(
blade-balancer.jpg
Attached Images
]]> Main Discussions muscleflex http://www.rcheliaddict.co.uk/main-discussions/97897-need-help-identifying-part.html Gopro Brushless 2 axis Gimbal newly Arrived! http://www.rcheliaddict.co.uk/moonhobby-com/97896-gopro-brushless-2-axis-gimbal-newly-arrived.html Wed, 19 Jun 2013 07:48:01 GMT The newly released Tarot L68A08 (http://www.moonhobby.com/tarot-tl68a08-gopro-brushless-camera-mount-rack-assembly-p-64925.html) gopro brushless... The newly released Tarot L68A08 gopro brushless gimbal has just arrived, it's provided by tarot, tested to be very well.
Tarot TL68A08 Related Part Number:

  • Camera Mount hanging hook TL68A01
  • GOPRO camera fasteners TL68A02
  • GOPRO brushless PTZ camera frame assembly TL68A03
  • GOPRO Camera Mount roll arm TL68A04
  • GOPRO PTZ stand arm motor base TL68A05
  • GOPRO brushless motor TL68A06 PTZ
  • GOPRO two axis PTZ shock group TL68A07
  • GOPRO brushless pan rack assembly TL68A08
  • GOPRO Camera Mount roll axis brushless motor TL68A09
  • GOPRO PTZ suspension ball TL68A11
  • GOPRO two-axis gyroscope ZYX22 PTZ
  • Click image for larger version.  Name: tl68a08.jpg  Views: 18  Size: 60.3 KB  ID: 62033
Attached Thumbnails
Click image for larger version.  Name: tl68a08.jpg  Views: N/A  Size: 60.3 KB  ID: 62033  
]]> MoonHobby.com moonhobby.com http://www.rcheliaddict.co.uk/moonhobby-com/97896-gopro-brushless-2-axis-gimbal-newly-arrived.html 750mx Quite Hot after 1 battery http://www.rcheliaddict.co.uk/t-rex-700e/97895-750mx-quite-hot-after-1-battery.html Wed, 19 Jun 2013 07:35:57 GMT I flew my DFC HV last night for 2 packs. I noticed that after 1 pack, my esc was warm (just warm.. not too bad) but my motor was quite hot -... I flew my DFC HV last night for 2 packs.
I noticed that after 1 pack, my esc was warm (just warm.. not too bad) but my motor was quite hot - definitely can't leave my fingers on it without saying OUCH!

Is this because my heli is new? It's only a month old
Also - can the motor pinion to main gear mesh be adjusted? I noticed white powder on the black main gears and a friend said it feels a tad tight when you rotate the head by hand... (it's actually much better now since my flights last night) but I just want to make sure...

Do I need to adjust the mesh or do I just need to bed the gears in? (break in period?)

I have read of motor shafts snapping in flight (on HF forum) so don't want this to happen to me
photo.jpg

By the way - my head speeds are:
N 1750
i1 1900
i2 2050
Attached Images
]]> T-Rex 700E muscleflex http://www.rcheliaddict.co.uk/t-rex-700e/97895-750mx-quite-hot-after-1-battery.html 302 MPH heli http://www.rcheliaddict.co.uk/main-discussions/97894-302-mph-heli.html Wed, 19 Jun 2013 07:34:49 GMT Caught my attention check out the flying bike in the add below as well Cheers Jason Eurocopter X3 Triple Rotor Helicopter Sets Epically Fast Speed... Caught my attention check out the flying bike in the add below as well Cheers Jason
Eurocopter X3 Triple Rotor Helicopter Sets Epically Fast Speed Record Of 302MPH (VIDEO)

This one got my attention as well.
http://www.huffingtonpost.co.uk/2013...tml?ref=topbar ]]> Main Discussions jasoncook http://www.rcheliaddict.co.uk/main-discussions/97894-302-mph-heli.html Dx8 + tm1000 noobie question. http://www.rcheliaddict.co.uk/transmitters-receivers/97893-dx8-tm1000-noobie-question.html Wed, 19 Jun 2013 07:32:50 GMT Hi guy's, regarding the flight log screen, does the antenna fades mean the tm1000 antenna's or the rx antenna's,? I'm not sure which one to move. ]]> HeliGuy UK http://www.rcheliaddict.co.uk/transmitters-receivers/97893-dx8-tm1000-noobie-question.html mikado logo 600 http://www.rcheliaddict.co.uk/wanted/97892-mikado-logo-600-a.html Wed, 19 Jun 2013 07:03:06 GMT I would like to try a logo 600 3D/SX/SE so please if any one wants to part with one let me know i need it bnf please thankyou. I would like to try a logo 600 3D/SX/SE so please if any one wants to part with one let me know i need it bnf please thankyou. ]]> Wanted rockyrotti http://www.rcheliaddict.co.uk/wanted/97892-mikado-logo-600-a.html For Sale Trex 500 Carbon Tail Blades http://www.rcheliaddict.co.uk/sale/97890-trex-500-carbon-tail-blades.html Wed, 19 Jun 2013 06:35:22 GMT Just found this whilst cleaning my work table. I had 2 carbon tail blades with my trex 500 when I got it. I chipped the first pair and when I was... Just found this whilst cleaning my work table.
I had 2 carbon tail blades with my trex 500 when I got it. I chipped the first pair and when I was looking for spares, I noticed they were so expensive so I ordered a pair of KBDD tail blades instead.
I opened this extra packet up whilst I was waiting for the tail blades to arrive

...so only used for a day.
Don't have my 500 anymore.
£8 shipped - bank transfer only.
IMG_8892.jpgIMG_8893.jpgIMG_8895.jpg
Attached Images
]]> For Sale muscleflex http://www.rcheliaddict.co.uk/sale/97890-trex-500-carbon-tail-blades.html Wanted Spektrum DSM2 satellite http://www.rcheliaddict.co.uk/wanted/97889-wanted-spektrum-dsm2-satellite.html Wed, 19 Jun 2013 00:56:08 GMT Looking for a Spektrum DSM2 satellite. Please let me know if you have one? Surinder. Looking for a Spektrum DSM2 satellite.

Please let me know if you have one?

Surinder. ]]> Wanted Surinder Singh http://www.rcheliaddict.co.uk/wanted/97889-wanted-spektrum-dsm2-satellite.html Wanted Tail Servo For Trex450 http://www.rcheliaddict.co.uk/wanted/97888-wanted-tail-servo-trex450.html Wed, 19 Jun 2013 00:51:47 GMT Looking for a tail servo suitable for use on Trex450 pro tail. Ds520 or similar. Let me know if you have anything suitable? Surinder. Looking for a tail servo suitable for use on Trex450 pro tail.
Ds520 or similar.
Let me know if you have anything suitable?

Surinder. ]]> Wanted Surinder Singh http://www.rcheliaddict.co.uk/wanted/97888-wanted-tail-servo-trex450.html For Sale Trex 700n DFC airframe only http://www.rcheliaddict.co.uk/sale/97887-trex-700n-dfc-airframe-only.html Tue, 18 Jun 2013 22:27:27 GMT Selling my Trex700nDFC in immaculate condition, well looked after and has just had mainshaft bearings replaced. Has quk quick release canopy mounts... Selling my Trex700nDFC in immaculate condition, well looked after and has just had mainshaft bearings replaced. Has quk quick release canopy mounts at the front and quk thumbscrew mounts on the rear (best combo for this model) Lynx clutch and liner, KBDD lime green dampeners fitted and has the black indestructible tail gears fitted too. Will add some pics as soon as I can. Looking for offers around £300 please :) ]]> For Sale tonystevens http://www.rcheliaddict.co.uk/sale/97887-trex-700n-dfc-airframe-only.html Finally broken through the wall http://www.rcheliaddict.co.uk/main-discussions/97886-finally-broken-through-wall.html Tue, 18 Jun 2013 21:58:58 GMT Over the last few months i had pretty much hit a wall so to speak in my flying, Was kind of stuck in a rut not having confidence to try new stuff etc... Over the last few months i had pretty much hit a wall so to speak in my flying, Was kind of stuck in a rut not having confidence to try new stuff etc and was almost loosing enthusiasm in flying altogether :nonchalance:,
But recently as some of you may have seen in my recent thread i have been teaching myself piro flips,
A lot of hours on the sim and i pretty much sorted a half piro flip, I tried it the other night for real when i had a chance to put a couple packs through my 450 and they were ok, Some more sim time the last couple nights and i went out tonight with the 450 and my Fusion 50 had around 7 flights between the two and pretty much sorted the half piro with both heli's, Can now get it spot on 3 out of 5 times which im really happy about :congratulatory:

The thing that got me was as soon as i was confident with the flips i started doing other stuff in the air i had never done before and also if i got into a dumb thumb situation it was a lot easier to get myself back in line again,
Learning the flips has totally changed the way i fly now, im much more confident doing other tricks in various orientations now where as before i was only confident doing them say tail in or nose right etc

I seem to have a new found enthusiasm and confidence in my flying, Just cant wait to get out again and keep pushing myself now :pride: ]]> Main Discussions Nick1975 http://www.rcheliaddict.co.uk/main-discussions/97886-finally-broken-through-wall.html dx8 switch settings http://www.rcheliaddict.co.uk/setup-advice/97885-dx8-switch-settings.html Tue, 18 Jun 2013 21:55:46 GMT Hey all. Ok I have a trex 600 with the airwolf body. Currently I am re fitting the body back on the trex. The problem I have is the retracts are... Hey all. Ok I have a trex 600 with the airwolf body. Currently I am re fitting the body back on the trex. The problem I have is the retracts are operated by three servos. I am sure I had a y lead to two servos and used a second channel for the third servo. I cant remember how I got 2 chanels to work with one switch or am I just losing it lol. Can it be done as I am sure thats how I had it setup before ]]> Setup Advice Psyconn http://www.rcheliaddict.co.uk/setup-advice/97885-dx8-switch-settings.html For Sale Trex 500 Agusta 109 Coast Guard Heli http://www.rcheliaddict.co.uk/sale/97884-trex-500-agusta-109-coast-guard-heli.html Tue, 18 Jun 2013 21:45:46 GMT Selling up my Trex 500 scale Heli as I need to buy batteries for my 700 heli. The 500 is the full metal flybarred head version with TT drive tail.The... Selling up my Trex 500 scale Heli as I need to buy batteries for my 700 heli. The 500 is the full metal flybarred head version with TT drive tail.The Blades are painted for scale look.It has Hitec HS-5245MG servos & Metal horns on cyclic with a futaba GY401 and 9257 on the tail..It has upgraded metal retracts controlled with Hitec HS-65HB servos.Align 500 motor with align 60 amp esc.Comes with spektrum AR7000 with sat and a 6s 3000mah battery so its ready to bind and fly.The Fuselage is an Agusta 109 red and white U.S. Coast Guard version with 9v strobe and nav light kit installed. Also included is the canopy, skids and fins etc to change back to pod and boom.This has sat on my shelf for over a year and has never been crashed etc.
PM me for pictures/Details
£450 posted Pp fees paid or gifted ]]> For Sale blade77 http://www.rcheliaddict.co.uk/sale/97884-trex-500-agusta-109-coast-guard-heli.html For Sale Align DS655 tail servo http://www.rcheliaddict.co.uk/sale/97883-align-ds655-tail-servo.html Tue, 18 Jun 2013 21:16:02 GMT Removed from my rush this eve, only 6 months old max £30 posted Removed from my rush this eve, only 6 months old max £30 posted ]]> For Sale moonmanflyer http://www.rcheliaddict.co.uk/sale/97883-align-ds655-tail-servo.html For Sale AR7200BX FBL spektrum unit with sat if needed http://www.rcheliaddict.co.uk/sale/97882-ar7200bx-fbl-spektrum-unit-sat-if-needed.html Tue, 18 Jun 2013 21:14:48 GMT Removed from my Rush 750 this eve, comes boxed and with or without DSXM sat if needed, £110 without, £120 with sat Removed from my Rush 750 this eve, comes boxed and with or without DSXM sat if needed, £110 without, £120 with sat ]]> For Sale moonmanflyer http://www.rcheliaddict.co.uk/sale/97882-ar7200bx-fbl-spektrum-unit-sat-if-needed.html Sold Scorpion Ultimate 520KV motor for 90 size http://www.rcheliaddict.co.uk/sale/97881-scorpion-ultimate-520kv-motor-90-size.html Tue, 18 Jun 2013 21:13:19 GMT Removed from my Rush 750 this evening, in excellent condition, mega power, boxed etc, £160 posted, bargin Removed from my Rush 750 this evening, in excellent condition, mega power, boxed etc, £160 posted, bargin ]]> For Sale moonmanflyer http://www.rcheliaddict.co.uk/sale/97881-scorpion-ultimate-520kv-motor-90-size.html Sold Castle 120HV V2 ESC http://www.rcheliaddict.co.uk/sale/97880-castle-120hv-v2-esc.html Tue, 18 Jun 2013 21:11:45 GMT Removed from my Rush 750 this eve, excellent order, about 6 months old, £115 posted Removed from my Rush 750 this eve, excellent order, about 6 months old, £115 posted ]]> For Sale moonmanflyer http://www.rcheliaddict.co.uk/sale/97880-castle-120hv-v2-esc.html 600n with vbar help http://www.rcheliaddict.co.uk/align-600n/97879-600n-vbar-help.html Tue, 18 Jun 2013 21:07:49 GMT Has anyone setup a vbar on a 600n I'm using a v2 head and am having trouble getting the servo horns correct to get the sliders up. I've gone in as far as I can on the horns but still too much movment. When I didn't 700 I changed the mixing horns for the E version and it worked a treat. Is there any such fix for the 600 version anyone knows about?

Ta ]]> Align 600N Sesame http://www.rcheliaddict.co.uk/align-600n/97879-600n-vbar-help.html next helicopter after a mcpx ? http://www.rcheliaddict.co.uk/main-discussions/97878-next-helicopter-after-mcpx.html Tue, 18 Jun 2013 20:43:24 GMT hi guys/gals What should I get next after a mcpx ? Not really after a great big helicopter , do most of my flying indoors at the moment .. hi guys/gals
What should I get next after a mcpx ? Not really after a great big helicopter , do most of my flying indoors at the moment .. ]]> Main Discussions graycbr http://www.rcheliaddict.co.uk/main-discussions/97878-next-helicopter-after-mcpx.html Plz plz watch this video http://www.rcheliaddict.co.uk/off-topic/97877-plz-plz-watch-video.html Tue, 18 Jun 2013 20:43:07 GMT You have to watch all to get full benefit you will not be disappointed :) Car Sounds/Mouth Unbelievably amazing !! - YouTube... You have to watch all to get full benefit you will not be disappointed :)

Car Sounds/Mouth Unbelievably amazing !! - YouTube ]]> Off the Topic GIXERMAN http://www.rcheliaddict.co.uk/off-topic/97877-plz-plz-watch-video.html For Sale Futaba 8FG Super http://www.rcheliaddict.co.uk/sale/97876-futaba-8fg-super.html Tue, 18 Jun 2013 20:35:52 GMT For Sale Futaba 8FG Super Purchased around the start of this year. Selling to fund a 14SG. £200 Cheers For Sale

Futaba 8FG Super
Purchased around the start of this year.
Selling to fund a 14SG.

£200

Cheers

Alex ]]> For Sale Alex Hawtin http://www.rcheliaddict.co.uk/sale/97876-futaba-8fg-super.html Cyclic servos DC0915 http://www.rcheliaddict.co.uk/thunder-tiger-mini-titan/97875-cyclic-servos-dc0915.html Tue, 18 Jun 2013 20:21:28 GMT Hi Guys, just wondered if any of you guys know where I can get a pair of cyclic servos for a V1 FBL, they are Ace DC0915's. I stripped a pair after forgetting to start my timer and she landed a bit hard, can't believe how hard it is to get a couple of what you'd think were common servo's. Any help would be great ]]> Thunder Tiger - Mini Titan Mutley2 http://www.rcheliaddict.co.uk/thunder-tiger-mini-titan/97875-cyclic-servos-dc0915.html Pic of the TDR coming out of the tree!! http://www.rcheliaddict.co.uk/henseleit-helicopters/97874-pic-tdr-coming-out-tree.html Tue, 18 Jun 2013 20:17:57 GMT Rob Bingham, you the man for getting this shot. If you look closely you can see the Opti pack at the bottom, then to the upper right of that its... Rob Bingham, you the man for getting this shot.

If you look closely you can see the Opti pack at the bottom, then to the upper right of that its the boom with 1 boom support and the tail control rod with half the CF fin then just to the right and slightly lower is the main frame with the canopy on as you can make out the blades which are only about 15cm long by now lol.


]]> Henseleit Helicopters Jamin_00 http://www.rcheliaddict.co.uk/henseleit-helicopters/97874-pic-tdr-coming-out-tree.html oiling a spin 8000 motor http://www.rcheliaddict.co.uk/e-flite-blade-130x/97873-oiling-spin-8000-motor.html Tue, 18 Jun 2013 20:17:13 GMT need to know how are you meant to oil the spin motor on a 130x please. said do it in the instructions but they got thrown away need to know how are you meant to oil the spin motor on a 130x please. said do it in the instructions but they got thrown away ]]> E-flite Blade 130x fatboyrob http://www.rcheliaddict.co.uk/e-flite-blade-130x/97873-oiling-spin-8000-motor.html Raptor 30/50 V2 Quick UK seesaw, colour red http://www.rcheliaddict.co.uk/wanted/97872-raptor-30-50-v2-quick-uk-seesaw-colour-red.html Tue, 18 Jun 2013 20:15:48 GMT Due to stripping a thread in the seesaw I am on the look out for another one. I tried to put a M3 helicoil in it but it was unsuccessful. Pleaes let... Due to stripping a thread in the seesaw I am on the look out for another one. I tried to put a M3 helicoil in it but it was unsuccessful.
Pleaes let me know if you have one

Thanks

Dave ]]> Wanted davec_7 http://www.rcheliaddict.co.uk/wanted/97872-raptor-30-50-v2-quick-uk-seesaw-colour-red.html Tail speed http://www.rcheliaddict.co.uk/beastx/97871-tail-speed.html Tue, 18 Jun 2013 19:54:14 GMT Just been flying tonight and my tail servo is absolutely ballistic far to fast for my flying style at the moment !!!!! any one know how to tame it... Just been flying tonight and my tail servo is absolutely ballistic far to fast for my flying style at the moment !!!!! any one know how to tame it down a tad so that its not a full speed. its the ar7200bx with futaba bls 251 servo on goblin 500.

regards

mick ]]> BeastX moggyp18 http://www.rcheliaddict.co.uk/beastx/97871-tail-speed.html Getting a high quality image http://www.rcheliaddict.co.uk/go-pro-alike/97870-getting-high-quality-image.html Tue, 18 Jun 2013 19:06:45 GMT I know that I will never get a very high quality picture on my GoPro 3 so I'm looking for something better for my full FPV Quad.

What is the best camera to use for high-quality images? I guess it would need to have a life output for first person view just like the GoPro. What do the professionals use? ]]> Go-Pro and alike JezUK1 http://www.rcheliaddict.co.uk/go-pro-alike/97870-getting-high-quality-image.html