Blade 130x intermittent tail blow out
by, 31-08-2012 at 10:36 PM (1762 Views)
Is anyone having problems with there 130x tail blowing out occasional during 3d flight causing the heli to piro anti clockwise out of control?
It doesnít happen all the time. Today I flew 5 batteries, during battery 1 and 2 the tail blow out once for each battery causing it to piro out of control and crash (no damage & no repair was required). All the gears were brand new (just replaced) for flight 1 and all the gears are still sat correctly. Battery 3, 4 and 5 had no problems.
Iíve checked all 4 tail gears and there are no problems or missing teeth; itís just strange 2 out of 5 flights had a problem and 3 were perfect even though nothing had changed on the heli. I also donít think I was pushing the heli so hard it caused the tail to blow out; I actually think I pushed the heli harder in battery 3, 4 and 5.
I donít think itís a problem with tail slop as Iíve had this problem with stock and now the upgraded tail to a microheli tail blade grips and rakoheli tail pitch slider which has taken away most of the slop and all vibes.
This heli is great; I just want a little more confidence in the tail hold!
Any ideas on the cause and solution/fix?