Thread: funny behaviour...

Evening all..

Just put an AR7200 on my newly built 600efl pro and its doing a couple of wierd things.

when powering up,one of the servos moves to its extreme then back again,and when i power up the castle esc,as it does its power up beeps,one of the other cyclic servos moves in tune with the beeps.(none of this happens on the unit on my 700e)

The disturbing thing is when spooling up.The heli does a little dance when going light on the skids and sometimes leaps about 6" up in the air at a 45 degree angle with me not having given that input.

Ive had a trawl through other related posts and people are suggesting vibes.Ive loosened off the servo cables,made sure they are away from the esc and i already have the centre out of the white mounting pad that comes with the unit.i cant really see any vibes on the heli or tail to be honest.

Any other suggestions?

i might try a normal 3m mounting pad instead of the supplied bx pad.Last resort is to swap the unit from my 700 to test.

hmm thats very odd,

I had the same thing happen on my old beast x, try rebinding the machine and seeing if that cures everything, if still no luck try doing a factory reset on the beast? still failing that maybe try another receiver?

it sounds like the beast us glitching to me, have you got a good power supply to the unit and servos?
i would try a rebind as first tho just to take bad binding out the equation, hope you resolve it dude

Thanks for the reply.i tracked it down to a 610 servo.swapped out and its flying like a dream.