Originally Posted by Asid

Hi

Make sure you set it up as cyclic to throttle mix and not the other way round.

First of all:

Enable P-Mix1
Set aileron as master and throttle as the slave
Rate + (15 to 20%)
- (15 to 20%) (use servo mon to check correct direction)
Switch position to On
Offset to 0

Enable P-Mix2
Set Elevator as master and throttle as the slave
Rate + (15 to 20%)
- (15 to 20%) (use servo mon to check correct direction)
Switch position to On
Offset to 0

If you set your max Throttle point to 90% not 100% it will help avoid throttle binding at high throttle values

Sub trim can be used to stop the throttle servo binding.

Use servo montor function to see it working.

This is my understanding of it